<feed xmlns='http://www.w3.org/2005/Atom'>
<title>u-boot.git/board/altera, branch v2012.07</title>
<subtitle>Unnamed repository; edit this file 'description' to name the repository.
</subtitle>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/'/>
<entry>
<title>board/nios2-generic: Use altera_pio driver and remove board specific driver</title>
<updated>2011-10-28T01:51:19+00:00</updated>
<author>
<name>Joachim Foerster</name>
<email>joachim.foerster@missinglinkelectronics.com</email>
</author>
<published>2011-10-21T13:48:51+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=df969b5ffd62449f3625dacb036bef107d5306d4'/>
<id>df969b5ffd62449f3625dacb036bef107d5306d4</id>
<content type='text'>
Signed-off-by: Joachim Foerster &lt;joachim.foerster@missinglinkelectronics.com&gt;
Signed-off-by: Thomas Chou &lt;thomas@wytron.com.tw&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Joachim Foerster &lt;joachim.foerster@missinglinkelectronics.com&gt;
Signed-off-by: Thomas Chou &lt;thomas@wytron.com.tw&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>gpio: Add driver for Altera's PIO core</title>
<updated>2011-10-28T01:50:49+00:00</updated>
<author>
<name>Joachim Foerster</name>
<email>joachim.foerster@missinglinkelectronics.com</email>
</author>
<published>2011-10-21T13:48:50+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=03d67e127685f65513e7b78dacbd4ccaf01053f6'/>
<id>03d67e127685f65513e7b78dacbd4ccaf01053f6</id>
<content type='text'>
This driver may handle multiple PIO cores and thus needs to be
setup by calling the altera_pio_init() function within the early
board setup routine.

The driver comes with some extras, see below the copyleft header.

Signed-off-by: Joachim Foerster &lt;joachim.foerster@missinglinkelectronics.com&gt;
Tested-by: Thomas Chou &lt;thomas@wytron.com.tw&gt;
Signed-off-by: Thomas Chou &lt;thomas@wytron.com.tw&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This driver may handle multiple PIO cores and thus needs to be
setup by calling the altera_pio_init() function within the early
board setup routine.

The driver comes with some extras, see below the copyleft header.

Signed-off-by: Joachim Foerster &lt;joachim.foerster@missinglinkelectronics.com&gt;
Tested-by: Thomas Chou &lt;thomas@wytron.com.tw&gt;
Signed-off-by: Thomas Chou &lt;thomas@wytron.com.tw&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>altera_tse: Add support for dedicated descriptor memory</title>
<updated>2011-10-26T19:27:37+00:00</updated>
<author>
<name>Joachim Foerster</name>
<email>joachim.foerster@missinglinkelectronics.com</email>
</author>
<published>2011-10-17T05:24:44+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=b962ac794a26ff80269755c13c3e4fee65c3809e'/>
<id>b962ac794a26ff80269755c13c3e4fee65c3809e</id>
<content type='text'>
Signed-off-by: Joachim Foerster &lt;joachim.foerster@missinglinkelectronics.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Joachim Foerster &lt;joachim.foerster@missinglinkelectronics.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>punt unused clean/distclean targets</title>
<updated>2011-10-15T20:20:36+00:00</updated>
<author>
<name>Mike Frysinger</name>
<email>vapier@gentoo.org</email>
</author>
<published>2011-10-13T06:54:57+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=464c79207c89f247f97b344495924eabb0c9738e'/>
<id>464c79207c89f247f97b344495924eabb0c9738e</id>
<content type='text'>
The top level Makefile does not do any recursion into subdirs when
cleaning, so these clean/distclean targets in random arch/board dirs
never get used.  Punt them all.

MAKEALL didn't report any errors related to this that I could see.

Signed-off-by: Mike Frysinger &lt;vapier@gentoo.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The top level Makefile does not do any recursion into subdirs when
cleaning, so these clean/distclean targets in random arch/board dirs
never get used.  Punt them all.

MAKEALL didn't report any errors related to this that I could see.

Signed-off-by: Mike Frysinger &lt;vapier@gentoo.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Handle most LDSCRIPT setting centrally</title>
<updated>2011-04-29T22:59:47+00:00</updated>
<author>
<name>Scott Wood</name>
<email>scottwood@freescale.com</email>
</author>
<published>2011-04-06T13:31:37+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=83b7e2a7f2f9cf7651e623c75aa9a27ad6488fb3'/>
<id>83b7e2a7f2f9cf7651e623c75aa9a27ad6488fb3</id>
<content type='text'>
Currently, some linker scripts are found by common code in config.mk.
Some are found using CONFIG_SYS_LDSCRIPT, but the code for that is
sometimes in arch config.mk and sometimes in board config.mk.  Some
are found using an arch-specific rule for looking in CPUDIR, etc.

Further, the powerpc config.mk rule relied on CONFIG_NAND_SPL
when it really wanted CONFIG_NAND_U_BOOT -- which covered up the fact
that not all NAND_U_BOOT builds actually wanted CPUDIR/u-boot-nand.lds.

Replace all of this -- except for a handful of boards that are actually
selecting a linker script in a unique way -- with centralized ldscript
finding.

If board code specifies LDSCRIPT, that will be used.
Otherwise, if CONFIG_SYS_LDSCRIPT is specified, that will be used.

If neither of these are specified, then the central config.mk will
check for the existence of the following, in order:

$(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT)
$(TOPDIR)/$(CPUDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT)
$(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
$(TOPDIR)/$(CPUDIR)/u-boot.lds

Some boards (sc3, cm5200, munices) provided their own u-boot.lds that
were dead code, because they were overridden by a CPUDIR u-boot.lds under
the old powerpc rules.  These boards' own u-boot.lds have bitrotted and
no longer work -- these lds files have been removed.

Signed-off-by: Scott Wood &lt;scottwood@freescale.com&gt;
Tested-by: Graeme Russ &lt;graeme.russ@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Currently, some linker scripts are found by common code in config.mk.
Some are found using CONFIG_SYS_LDSCRIPT, but the code for that is
sometimes in arch config.mk and sometimes in board config.mk.  Some
are found using an arch-specific rule for looking in CPUDIR, etc.

Further, the powerpc config.mk rule relied on CONFIG_NAND_SPL
when it really wanted CONFIG_NAND_U_BOOT -- which covered up the fact
that not all NAND_U_BOOT builds actually wanted CPUDIR/u-boot-nand.lds.

Replace all of this -- except for a handful of boards that are actually
selecting a linker script in a unique way -- with centralized ldscript
finding.

If board code specifies LDSCRIPT, that will be used.
Otherwise, if CONFIG_SYS_LDSCRIPT is specified, that will be used.

If neither of these are specified, then the central config.mk will
check for the existence of the following, in order:

$(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT)
$(TOPDIR)/$(CPUDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT)
$(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
$(TOPDIR)/$(CPUDIR)/u-boot.lds

Some boards (sc3, cm5200, munices) provided their own u-boot.lds that
were dead code, because they were overridden by a CPUDIR u-boot.lds under
the old powerpc rules.  These boards' own u-boot.lds have bitrotted and
no longer work -- these lds files have been removed.

Signed-off-by: Scott Wood &lt;scottwood@freescale.com&gt;
Tested-by: Graeme Russ &lt;graeme.russ@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>nios2: reset cfi flash before reading env</title>
<updated>2011-04-08T13:02:27+00:00</updated>
<author>
<name>Thomas Chou</name>
<email>thomas@wytron.com.tw</email>
</author>
<published>2011-01-18T03:13:56+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=030103d780490096c7052ecee8f2af1cb422217d'/>
<id>030103d780490096c7052ecee8f2af1cb422217d</id>
<content type='text'>
Flash might be in unknown state when u-boot is started with jtag.
And got wrong env data. So reset it in board early init.

We cannot use generic cfi flash routines, because flash_init() is
not run yet.

Signed-off-by: Thomas Chou &lt;thomas@wytron.com.tw&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Flash might be in unknown state when u-boot is started with jtag.
And got wrong env data. So reset it in board early init.

We cannot use generic cfi flash routines, because flash_init() is
not run yet.

Signed-off-by: Thomas Chou &lt;thomas@wytron.com.tw&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>rename _end to __bss_end__</title>
<updated>2011-03-27T17:18:37+00:00</updated>
<author>
<name>Po-Yu Chuang</name>
<email>ratbert@faraday-tech.com</email>
</author>
<published>2011-03-01T22:59:59+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=44c6e6591cb451ae606f8bde71dd5fb7b4002544'/>
<id>44c6e6591cb451ae606f8bde71dd5fb7b4002544</id>
<content type='text'>
Currently, _end is used for end of BSS section.  We want _end to mean
end of u-boot image, so we rename _end to __bss_end__ first.

Signed-off-by: Po-Yu Chuang &lt;ratbert@faraday-tech.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Currently, _end is used for end of BSS section.  We want _end to mean
end of u-boot image, so we rename _end to __bss_end__ first.

Signed-off-by: Po-Yu Chuang &lt;ratbert@faraday-tech.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>nios2: add gpio_is_valid</title>
<updated>2011-02-08T13:29:53+00:00</updated>
<author>
<name>Thomas Chou</name>
<email>thomas@wytron.com.tw</email>
</author>
<published>2010-12-27T02:46:01+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=d8a593c68bac7b9d9b26af6fa8c392671213ce93'/>
<id>d8a593c68bac7b9d9b26af6fa8c392671213ce93</id>
<content type='text'>
Signed-off-by: Thomas Chou &lt;thomas@wytron.com.tw&gt;
Signed-off-by: Scott McNutt &lt;smcnutt@psyent.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Thomas Chou &lt;thomas@wytron.com.tw&gt;
Signed-off-by: Scott McNutt &lt;smcnutt@psyent.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>nios2: add gpio_free</title>
<updated>2011-02-08T13:29:53+00:00</updated>
<author>
<name>Thomas Chou</name>
<email>thomas@wytron.com.tw</email>
</author>
<published>2010-12-24T07:19:44+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=e91d54535f8535c6de05044fa6f715a78f4320f8'/>
<id>e91d54535f8535c6de05044fa6f715a78f4320f8</id>
<content type='text'>
Signed-off-by: Thomas Chou &lt;thomas@wytron.com.tw&gt;
Signed-off-by: Scott McNutt &lt;smcnutt@psyent.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Thomas Chou &lt;thomas@wytron.com.tw&gt;
Signed-off-by: Scott McNutt &lt;smcnutt@psyent.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Switch from archive libraries to partial linking</title>
<updated>2010-11-17T20:02:18+00:00</updated>
<author>
<name>Sebastien Carlier</name>
<email>sebastien.carlier@gmail.com</email>
</author>
<published>2010-11-05T14:48:07+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=6d8962e814c15807dd6ac5757904be2a02d187b8'/>
<id>6d8962e814c15807dd6ac5757904be2a02d187b8</id>
<content type='text'>
Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils.  As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".

This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.

The name of each former library archive is preserved except for
extensions which change from ".a" to ".o".  This commit updates
references accordingly where needed, in particular in some linker
scripts.

This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols.  Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.

Signed-off-by: Sebastien Carlier &lt;sebastien.carlier@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils.  As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".

This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.

The name of each former library archive is preserved except for
extensions which change from ".a" to ".o".  This commit updates
references accordingly where needed, in particular in some linker
scripts.

This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols.  Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.

Signed-off-by: Sebastien Carlier &lt;sebastien.carlier@gmail.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
