u-boot.git/board/amcc/bubinga/bubinga.c, branch v2011.06

Fix incorrect use of getenv() before relocation

2011-05-12T17:48:42Z

A large number of boards incorrectly used getenv() in their board init code running before relocation. In some cases this caused U-Boot to hang when certain environment variables grew too long. Fix the code to use getenv_r(). Signed-off-by: Wolfgang Denk Cc: Stefan Roese Cc: The LEOX team Cc: Michael Schwingen Cc: Georg Schardt Cc: Werner Pfister Cc: Dirk Eibach Cc: Peter De Schrijver Cc: John Zhan Cc: Rishi Bhattacharya Cc: Peter Tyser

ppc4xx: Convert PPC4xx UIC defines from lower case to upper case

2009-09-28T08:45:42Z

The latest PPC4xx register cleanup patch missed the UIC defines. This patch now changes lower case UIC defines to upper case. Signed-off-by: Stefan Roese

ppc4xx: Big cleanup of PPC4xx defines

2009-09-11T08:35:58Z

This patch cleans up multiple issues of the 4xx register (mostly DCR, SDR, CPR, etc) definitions: - Change lower case defines to upper case (plb4_acr -> PLB4_ACR) - Change the defines to better match the names from the user's manuals (e.g. cprpllc -> CPR0_PLLC) - Removal of some unused defines Please test this patch intensive on your PPC4xx platform. Even though I tried not to break anything and tested successfully on multiple 4xx AMCC platforms, testing on custom platforms is recommended. Signed-off-by: Stefan Roese

Change initdram() return type to phys_size_t

2008-06-12T06:50:18Z

This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce

ppc4xx: Remove superfluous dram_init() call or replace it by initdram()

2008-06-03T18:22:19Z

Historically the 405 U-Boot port had a dram_init() call in early init stage. This function was still called from start.S and most of the time coded in assembler. This is not needed anymore (since a long time) and boards should implement the common initdram() function in C instead. This patch now removed the dram_init() call from start.S and removes the empty implementations that are scattered through most of the 405 board ports. Some older board ports really implement this dram_init() though. These are: csb272 csb472 ERIC EXBITGEN W7OLMC W7OLMG I changed those boards to call this assembler dram_init() function now from their board specific initdram() instead. This *should* work, but please test again on those platforms. And it is perhaps a good idea that those boards use some common 405 SDRAM initialization code from cpu/ppc4xx at some time. So further patches welcome here. Signed-off-by: Stefan Roese

ppc4xx: Add initial Zeus (PPC405EP) board support

2007-08-14T12:44:41Z

Signed-off-by: Stefan Roese

Cleanup for GCC-4.x

2005-10-13T14:45:02Z

Major cleanup for AMCC PPC4xx eval boards.

2005-08-01T14:49:12Z

Patch by Stefan Roese, 01 Aug 2005