u-boot.git/board/amcc/sequoia, branch v2009.03Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/board/amcc/sequoia?h=v2009.032009-03-17T09:52:36ZFix AMCC Sequoia board DDR memory configuration2009-03-17T09:52:36ZMikhail Zolotaryovlebon@lebon.org.ua2009-03-11T08:54:46Zurn:sha1:ee86fd15e1ccda4be41f1dba82b8c9efea9a3145
Sequoia board schematics (DES0211_11_SCH_11.pdf, page 5, unit U1D)
specifies that BankSel#1 is not connected, while bootloader memory
configuration is (board/amcc/sequoia/sdram.c):
mtsdram(DDR0_10, 0x00000300);
i.e. both Chip Selects used - not correct.
If we change to correct value here:
mtsdram(DDR0_10, 0x00000100);
memory is accessible OK also.
Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua>
Signed-off-by: Stefan Roese <sr@denx.de>
Command usage cleanup2009-01-28T07:49:52ZPeter Tyserptyser@xes-inc.com2009-01-28T00:03:12Zurn:sha1:2fb2604d5c20beb061b0a94282b7f6eb14d00cb8
Remove command name from all command "usage" fields and update
common/command.c to display "name - usage" instead of
just "usage". Also remove newlines from command usage fields.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Standardize command usage messages with cmd_usage()2009-01-28T07:43:45ZPeter Tyserptyser@xes-inc.com2009-01-28T00:03:10Zurn:sha1:62c3ae7c6ef215b1afa614abdf61acf077752207
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Align end of bss by 4 bytes2008-11-18T22:13:16ZSelvamuthukumarselva.muthukumar@e-coninfotech.com2008-10-16T17:24:03Zurn:sha1:9b827cf1720acda2473afa516956eab6f7cca9a1
Most of the bss initialization loop increments 4 bytes
at a time. And the loop end is checked for an 'equal'
condition. Make the bss end address aligned by 4, so
that the loop will end as expected.
Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
rename CFG_ macros to CONFIG_SYS2008-10-18T19:54:03ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2008-10-16T13:01:15Zurn:sha1:6d0f6bcf337c5261c08fabe12982178c2c489d76
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
rename CFG_ENV macros to CONFIG_ENV2008-09-10T20:48:06ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2008-09-10T20:48:06Zurn:sha1:0e8d158664a913392cb01fb11a948d83f72e105e
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH2008-09-10T20:48:04ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2008-09-10T20:48:04Zurn:sha1:5a1aceb0689e2f731491838970884a673ef7e7d3
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
rename environment.c in env_embedded.c to reflect is functionality2008-09-10T20:48:01ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2008-09-10T20:48:01Zurn:sha1:0cf4fd3cf8d0e00605bec5fc56f89c6415015a46
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Merge branch 'master' of /home/stefan/git/u-boot/u-boot into next2008-08-12T18:39:27ZStefan Roesesr@denx.de2008-08-12T18:39:27Zurn:sha1:9939ffd5fbf1f5aff4d8172531d4fc33797c62c8ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic.2008-08-07T10:06:18ZSteven A. Falcosfalco@harris.com2008-08-06T19:42:52Zurn:sha1:eab1007334b93a6209f1ec33615e26ef5311ede7
The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO
configuration to match the schematic, and also sets the SDR0_PFC1 register to
select the corresponding mode for the UARTs.
Signed-off-by: Steven A. Falco <sfalco@harris.com>
Signed-off-by: Stefan Roese <sr@denx.de>