u-boot.git/board/amcc, branch v1.3.4

ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic.

2008-08-07T10:06:18Z

The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO configuration to match the schematic, and also sets the SDR0_PFC1 register to select the corresponding mode for the UARTs. Signed-off-by: Steven A. Falco Signed-off-by: Stefan Roese

ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards

2008-07-13T13:04:11Z

This patch removes some ft_board_setup() functions from some 4xx boards. This can be done since we now have a default weak implementation for this in cpu/ppc4xx/fdt.c. Only board in need for a different/custom implementation like canyonlands need their own version. Signed-off-by: Stefan Roese

Fix some more printf() format issues.

2008-07-11T20:56:11Z

Signed-off-by: Wolfgang Denk

ppc4xx: Fix printf format warnings now visible with the updated format check

2008-07-10T07:58:06Z

This patch fixes ppc4xx related printf format warning. Those warnings are now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is really helpful. Signed-off-by: Stefan Roese

Cleanup: remove redundant deleting on *~ files

2008-07-02T21:53:23Z

Signed-off-by: Wolfgang Denk

Cleanup out-or-tree building for some boards (.depend)

2008-07-02T21:49:18Z

Signed-off-by: Wolfgang Denk

ppc4xx: Canyonlands: Disable the RTC M41T62 square wave output

2008-06-12T13:50:31Z

This patch disables the square wave output of the M41T62 RTC used on Canyonlands & Glacier. Here the explanation: The serial real-time clock part used in the design is an STMicro M41T62. This part has a full-time 32KHz square wave output that is connected to the TmrClk input to the processor. The default state for this square wave output is enabled so the output runs continuously when the board is powered normally and also from the battery. The TmrClk input to the processor goes to ground when the power is removed from the board/processor, and therefore the running square wave output is driving ground which drains the battery quickly. Signed-off-by: Stefan Roese

Change initdram() return type to phys_size_t

2008-06-12T06:50:18Z

This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce

Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xx

2008-06-11T20:13:07Z

ppc4xx: Unify AMCC's board config files (part 3/3)

2008-06-06T13:55:21Z

This patch series unifies the AMCC eval board ports by introducing a common include header for all AMCC eval boards: include/configs/amcc-common.h This header now includes all common configuration options/defines which are removed from the board specific headers. The reason for this is ease of maintenance and unified look and feel of all AMCC boards. Signed-off-by: Stefan Roese