u-boot.git/board/amcc, branch v2011.12

board/amcc/taihu/flash.c: Fix GCC 4.6 build warnings

2011-12-05T22:17:53+00:00

Fix:
flash.c: In function 'flash_erase_1':
flash.c:514:24: warning: variable 'l_sect' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'flash_erase_2':
flash.c:956:24: warning: variable 'l_sect' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk 
Cc: Stefan Roese 
Acked-by: Stefan Roese

board/amcc/yucca/flash.c: Fix GCC 4.6 build warnings

2011-12-05T22:17:47+00:00

Fix:
flash.c: In function 'flash_erase_1':
flash.c:425:24: warning: variable 'l_sect' set but not used
[-Wunused-but-set-variable]
flash.c: In function 'flash_erase_2':
flash.c:834:24: warning: variable 'l_sect' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk 
Cc: Stefan Roese 
Acked-by: Stefan Roese

board/amcc/common/flash.c: Fix GCC 4.6 build warning

2011-12-05T22:17:41+00:00

Fix:
In file included from flash.c:45:0:
../common/flash.c: In function 'flash_erase':
../common/flash.c:399:24: warning: variable 'l_sect' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Wolfgang Denk 
Cc: Stefan Roese 
Acked-by: Stefan Roese

common: move extern char console_buffer[] to common.h

2011-11-22T07:39:25+00:00

Extract all extern declarations for console_buffer[] out of c files into
the common.h header.

Signed-off-by: Igor Grinberg 
Cc: Frank Gottschling 
Cc: Murray Jensen

consolidate mdelay by providing a common function for all users

2011-10-21T23:16:08+00:00

There are several mdelay() definitions in the driver and
board code. Remove them all and provide a common mdelay()
in lib/time.c.

Signed-off-by: Anatolij Gustschin 
Acked-by: Mike Frysinger

punt unused clean/distclean targets

2011-10-15T20:20:36+00:00

The top level Makefile does not do any recursion into subdirs when
cleaning, so these clean/distclean targets in random arch/board dirs
never get used.  Punt them all.

MAKEALL didn't report any errors related to this that I could see.

Signed-off-by: Mike Frysinger

Fix incorrect use of getenv() before relocation

2011-05-12T17:48:42+00:00

A large number of boards incorrectly used getenv() in their board init
code running before relocation.  In some cases this caused U-Boot to
hang when certain environment variables grew too long.
Fix the code to use getenv_r().

Signed-off-by: Wolfgang Denk 
Cc: Stefan Roese 
Cc: The LEOX team 
Cc: Michael Schwingen 
Cc: Georg Schardt 
Cc: Werner Pfister 
Cc: Dirk Eibach 
Cc: Peter De Schrijver 
Cc: John Zhan 
Cc: Rishi Bhattacharya 
Cc: Peter Tyser

Handle most LDSCRIPT setting centrally

2011-04-29T22:59:47+00:00

Currently, some linker scripts are found by common code in config.mk.
Some are found using CONFIG_SYS_LDSCRIPT, but the code for that is
sometimes in arch config.mk and sometimes in board config.mk.  Some
are found using an arch-specific rule for looking in CPUDIR, etc.

Further, the powerpc config.mk rule relied on CONFIG_NAND_SPL
when it really wanted CONFIG_NAND_U_BOOT -- which covered up the fact
that not all NAND_U_BOOT builds actually wanted CPUDIR/u-boot-nand.lds.

Replace all of this -- except for a handful of boards that are actually
selecting a linker script in a unique way -- with centralized ldscript
finding.

If board code specifies LDSCRIPT, that will be used.
Otherwise, if CONFIG_SYS_LDSCRIPT is specified, that will be used.

If neither of these are specified, then the central config.mk will
check for the existence of the following, in order:

$(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT)
$(TOPDIR)/$(CPUDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT)
$(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
$(TOPDIR)/$(CPUDIR)/u-boot.lds

Some boards (sc3, cm5200, munices) provided their own u-boot.lds that
were dead code, because they were overridden by a CPUDIR u-boot.lds under
the old powerpc rules.  These boards' own u-boot.lds have bitrotted and
no longer work -- these lds files have been removed.

Signed-off-by: Scott Wood 
Tested-by: Graeme Russ

rename _end to __bss_end__

2011-03-27T17:18:37+00:00

Currently, _end is used for end of BSS section.  We want _end to mean
end of u-boot image, so we rename _end to __bss_end__ first.

Signed-off-by: Po-Yu Chuang

PPC4xx: Reduce NAND TLB window size on Canyonlands

2011-01-10T11:50:29+00:00

16MiB NAND TLB window is way too big. Reduce it to 1KiB.

Signed-off-by: Felix Radensky 
Signed-off-by: Stefan Roese