u-boot.git/board/atmel, branch v2016.09

nand: Embed mtd_info in struct nand_chip

2016-06-04T01:27:48Z

nand_info[] is now an array of pointers, with the actual mtd_info instance embedded in struct nand_chip. This is in preparation for syncing the NAND code with Linux 4.6, which makes the same change to struct nand_chip. It's in a separate commit due to the large amount of changes required to accommodate the change to nand_info[]. Signed-off-by: Scott Wood

board: sama5d2_xplained: change SDHCI GCK's clock source to UPLL

2016-05-24T06:08:37Z

Change the clock source of the SDHCI's generated clock from PLLA to UPLL clock to align to Linux driver. Signed-off-by: Wenyou Yang Reviewed-by: Andreas Bießmann

board: atmel: sama5d2_xplained: fix the missing pin config of SDMMC0

2016-05-24T06:08:35Z

Fix the missing pin config of the SDMMC0 interface. Signed-off-by: Wenyou Yang Reviewed-by: Andreas Bießmann

board: atmel: add SAMA5D2 PTC Engineering board

2016-05-24T06:08:35Z

The board supports following features: - Boot media support: NAND Flash/SPI Flash - Support ethernet - Support USB mass storage Signed-off-by: Wenyou Yang Reviewed-by: Andreas Bießmann

Change my mailaddress

2016-05-02T22:37:09Z

I'll switch my mails to my own server, so drop all gmail references. Signed-off-by: Andreas Bießmann

board: atmel: clean up the PMC_PLLICPR init code

2016-02-18T20:34:41Z

Due to introducing the PMC_PLLICPR init function, use this function to clean up the code. Signed-off-by: Wenyou Yang Tested-by: Heiko Schocher Reviewed-by: Andreas Bießmann

board: atmel: clean up peripheral clock code

2016-02-18T20:34:40Z

Due to introducing the new peripheral clock handle functions, use these functions to reduce duplicated code. Signed-off-by: Wenyou Yang Tested-by: Heiko Schocher [Rebased on current master, fixup for at91rm9200ek] Signed-off-by: Andreas Bießmann

board: atmel: sama5d2_xplained: add SPL support

2016-02-02T10:49:13Z

The sama5d2 Xplained SPL supports the boot medias: spi flash and SD Card. Signed-off-by: Wenyou Yang Reviewed-by: Andreas Bießmann

arm: at91/spl: mpddrc: add struct atmel_mpddrc_config

2016-02-02T10:49:11Z

Add struct atmel_mpddrc_config to accommodate the mpddrc register configurations, not using the mpddrc register map structure, struct atmel_mpddrc, in order to increase readability and reduce run-time memory use. Signed-off-by: Wenyou Yang Reviewed-by: Andreas Bießmann

arm: atmel: Add SAMA5D2 Xplained board

2015-11-30T21:27:53Z

The board supports following features: - Boot media support: SD card/e.MMC/SPI flash, - Support LCD display (optional, disabled by default), - Support ethernet, - Support USB mass storage. Signed-off-by: Wenyou Yang [fix checkpatch warnings] Signed-off-by: Andreas Bießmann