u-boot.git/board/atum8548, branch v2009.08

fsl_pci: Move prototypes into fsl_pci.h and remove explicit externs

2009-04-04T15:21:30Z

Signed-off-by: Kumar Gala

fsl_pci: Renamed immap_fsl_pci.h to fsl_pci.h

2009-04-04T15:21:29Z

Rename the pci header for FSL HW so we can move some prototypes in there and stop doing explicit externs Signed-off-by: Kumar Gala

Fix all linker script to handle all rodata sections

2009-03-20T21:39:12Z

A recent gcc added a new unaligned rodata section called '.rodata.str1.1', which needs to be added the the linker script. Instead of just adding this one section, we use a wildcard ".rodata*" to get all rodata linker section gcc has now and might add in the future. However, '*(.rodata*)' by itself will result in sub-optimal section ordering. The sections will be sorted by object file, which causes extra padding between the unaligned rodata.str.1.1 of one object file and the aligned rodata of the next object file. This is easy to fix by using the SORT_BY_ALIGNMENT command. This patch has not be tested one most of the boards modified. Some boards have a linker script that looks something like this: *(.text) . = ALIGN(16); *(.rodata) *(.rodata.str1.4) *(.eh_frame) I change this to: *(.text) . = ALIGN(16); *(.eh_frame) *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) This means the start of rodata will no longer be 16 bytes aligned. However, the boundary between text and rodata/eh_frame is still aligned to 16 bytes, which is what I think the real purpose of the ALIGN call is. Signed-off-by: Trent Piepho

85xx: remove the unused ddr_enable_ecc in the board file

2008-12-04T04:44:48Z

The DDR controller of 8548/8544/8568/8572/8536 processors have the ECC data init feature, and the new DDR code is using the feature, and we don't need the way with DMA to init memory any more. Signed-off-by: Dave Liu Acked-by: Andy Fleming

Align end of bss by 4 bytes

2008-11-18T22:13:16Z

Most of the bss initialization loop increments 4 bytes at a time. And the loop end is checked for an 'equal' condition. Make the bss end address aligned by 4, so that the loop will end as expected. Signed-off-by: Selvamuthukumar Signed-off-by: Wolfgang Denk

Coding Style cleanup, update CHANGELOG

2008-11-02T15:14:22Z

Signed-off-by: Wolfgang Denk

85xx: Convert all fsl_pci_init users to new APIs

2008-10-24T22:35:12Z

Converted ATUM8548, MPC8536DS, MPC8544DS, MPC8548CDS, MPC8568MDS, MPC8572DS, TQM85xx, and SBC8548 to use fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup(). With these changes the board code is a bit smaller and we get dma-ranges set in the device tree for these boards. Signed-off-by: Kumar Gala Signed-off-by: Andrew Fleming-AFLEMING

Pass dimm parameters to populate populate controller options

2008-10-18T19:54:04Z

Because some dimm parameters like n_ranks needs to be used with the board frequency to choose the board parameters like clk_adjust etc. in the board_specific_paramesters table of the board ddr file, we need to pass the dimm parameters to the board file. * move ddr dimm parameters header file from /cpu to /include directory. * add ddr dimm parameters to populate board specific options. * Fix fsl_ddr_board_options() for all the 8xxx boards which call this function. Signed-off-by: Haiying Wang

rename CFG_ macros to CONFIG_SYS

2008-10-18T19:54:03Z

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

FSL DDR: Convert atum8548 to new DDR code.

2008-08-27T16:43:51Z

Signed-off-by: Kumar Gala