u-boot.git/board/avionic-design/tec, branch next

ARM: tegra: set default SYS_CONFIG_NAME from SoC Kconfig

2025-05-08T05:31:13+00:00

Since most boards now use the same generic device config header, move its
setup to SoC Kconfig instead of setting SYS_CONFIG_NAME in each board's
Kconfig.

Signed-off-by: Svyatoslav Ryhel

ARM: tegra: replace per-device config headers with generic Tegra

2025-04-12T08:11:05+00:00

Most device headers contain SoC specific part and common Tegra post part.
Add a generic header which can be used by any Tegra device of one of the
supported SoC generations (T20, T30, T114, T124 or T210) without need in
device specific configuration.

Signed-off-by: Svyatoslav Ryhel

ARM: tegra: convert CFG_TEGRA_BOARD_STRING into Kconfig option

2025-04-12T06:48:30+00:00

Convert CFG_TEGRA_BOARD_STRING into Kconfig option and move it into device
board Kconfig.

Signed-off-by: Svyatoslav Ryhel

MAINTAINERS: Add a number of "common" directories

2023-07-25T16:44:47+00:00

A number of platforms have "common" directories that are in turn not
listed by the board MAINTAINERS file.  Add these directories in many
cases.

Signed-off-by: Tom Rini 
Reviewed-by: Simon Glass

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

ARM: tegra: move NVIDIA common files to arch/arm/mach-tegra

2015-05-13T16:46:19+00:00

All the Tegra boards borrow the files from board/nvidia/common/
directory, i.e., board/nvidia/common/* are not vendor-common files,
but SoC-common files.

Move NVIDIA common files to arch/arm/mach-tegra/ to clean up
Makefiles.

As arch/arm/mach-tegra/board.c already exists, this commit renames
board/nvidia/common/board.c to arch/arm/mach-tegra/board2.c,
expecting they will be consolidated as a second step.

Signed-off-by: Masahiro Yamada 
Acked-by: Marcel Ziswiler 
Cc: Stephen Warren 
Cc: Tom Warren 
Cc: Simon Glass 
Acked-by: Simon Glass 
Signed-off-by: Tom Warren

kconfig: remove redundant "string" type in arch and board Kconfigs

2014-09-13T20:43:55+00:00

Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}
are specified in arch/Kconfig.

We can delete the ones in arch and board Kconfig files.

This commit can be easily reproduced by the following command:

find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '
/config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ {
    N
    s/\n[[:space:]]*string//
}
'

Signed-off-by: Masahiro Yamada

tegra: kconfig: move board select menu and common settings

2014-08-31T01:19:32+00:00

Becuase the board select menu in arch/arm/Kconfig is too big,
move the Tegra board select menu to tegra/Kconfig.

Insert the Tegra SoC select menu between the arch select and the
board select.

 Architecture select
 |-- Tegra Platform (Tegra)
     |- Tegra SoC select (Tegra20 / 30 / 114 / 124)
        |- Board select

Consolidate also common settings (CONFIG_SYS_CPU="armv7" and
CONFIG_SYS_SOC="tegra*") and always "select" CONFIG_SPL as follows:

  config TEGRA
          bool
          select SPL

Signed-off-by: Masahiro Yamada 
Acked-by: Stephen Warren 
Cc: Tom Warren

Add board MAINTAINERS files

2014-07-30T12:48:06+00:00

We have switched to Kconfig and the boards.cfg file is going to
be removed. We have to retrieve the board status and maintainers
information from it.

The MAINTAINERS format as in Linux Kernel would be nice
because we can crib the scripts/get_maintainer.pl script.

After some discussion, we chose to put a MAINTAINERS file under each
board directory, not the top-level one because we want to collect
relevant information for a board into a single place.

TODO:
Modify get_maintainer.pl to scan multiple MAINTAINERS files.

Signed-off-by: Masahiro Yamada 
Suggested-by: Tom Rini 
Acked-by: Simon Glass

kconfig: add board Kconfig and defconfig files

2014-07-30T12:48:01+00:00

This commit adds:
 - arch/${ARCH}/Kconfig
    provide a menu to select target boards
 - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
 - configs/${TARGET_BOARD}_defconfig
    default setting of each board

(This commit was automatically generated by a conversion script
based on boards.cfg)

In Linux Kernel, defconfig files are located under
arch/${ARCH}/configs/ directory.
It works in Linux Kernel since ARCH is always given from the
command line for cross compile.

But in U-Boot, ARCH is not given from the command line.
Which means we cannot know ARCH until the board configuration is done.
That is why all the "*_defconfig" files should be gathered into a
single directory ./configs/.

Signed-off-by: Masahiro Yamada 
Acked-by: Simon Glass