u-boot.git/board/avionic-design/tec, branch v2016.01

ARM: tegra: move NVIDIA common files to arch/arm/mach-tegra

2015-05-13T16:46:19+00:00

All the Tegra boards borrow the files from board/nvidia/common/
directory, i.e., board/nvidia/common/* are not vendor-common files,
but SoC-common files.

Move NVIDIA common files to arch/arm/mach-tegra/ to clean up
Makefiles.

As arch/arm/mach-tegra/board.c already exists, this commit renames
board/nvidia/common/board.c to arch/arm/mach-tegra/board2.c,
expecting they will be consolidated as a second step.

Signed-off-by: Masahiro Yamada 
Acked-by: Marcel Ziswiler 
Cc: Stephen Warren 
Cc: Tom Warren 
Cc: Simon Glass 
Acked-by: Simon Glass 
Signed-off-by: Tom Warren

kconfig: remove redundant "string" type in arch and board Kconfigs

2014-09-13T20:43:55+00:00

Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME}
are specified in arch/Kconfig.

We can delete the ones in arch and board Kconfig files.

This commit can be easily reproduced by the following command:

find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e '
/config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ {
    N
    s/\n[[:space:]]*string//
}
'

Signed-off-by: Masahiro Yamada

tegra: kconfig: move board select menu and common settings

2014-08-31T01:19:32+00:00

Becuase the board select menu in arch/arm/Kconfig is too big,
move the Tegra board select menu to tegra/Kconfig.

Insert the Tegra SoC select menu between the arch select and the
board select.

 Architecture select
 |-- Tegra Platform (Tegra)
     |- Tegra SoC select (Tegra20 / 30 / 114 / 124)
        |- Board select

Consolidate also common settings (CONFIG_SYS_CPU="armv7" and
CONFIG_SYS_SOC="tegra*") and always "select" CONFIG_SPL as follows:

  config TEGRA
          bool
          select SPL

Signed-off-by: Masahiro Yamada 
Acked-by: Stephen Warren 
Cc: Tom Warren

Add board MAINTAINERS files

2014-07-30T12:48:06+00:00

We have switched to Kconfig and the boards.cfg file is going to
be removed. We have to retrieve the board status and maintainers
information from it.

The MAINTAINERS format as in Linux Kernel would be nice
because we can crib the scripts/get_maintainer.pl script.

After some discussion, we chose to put a MAINTAINERS file under each
board directory, not the top-level one because we want to collect
relevant information for a board into a single place.

TODO:
Modify get_maintainer.pl to scan multiple MAINTAINERS files.

Signed-off-by: Masahiro Yamada 
Suggested-by: Tom Rini 
Acked-by: Simon Glass

kconfig: add board Kconfig and defconfig files

2014-07-30T12:48:01+00:00

This commit adds:
 - arch/${ARCH}/Kconfig
    provide a menu to select target boards
 - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
    set CONFIG macros to the appropriate values for each board
 - configs/${TARGET_BOARD}_defconfig
    default setting of each board

(This commit was automatically generated by a conversion script
based on boards.cfg)

In Linux Kernel, defconfig files are located under
arch/${ARCH}/configs/ directory.
It works in Linux Kernel since ARCH is always given from the
command line for cross compile.

But in U-Boot, ARCH is not given from the command line.
Which means we cannot know ARCH until the board configuration is done.
That is why all the "*_defconfig" files should be gathered into a
single directory ./configs/.

Signed-off-by: Masahiro Yamada 
Acked-by: Simon Glass

kbuild: change out-of-tree build

2014-02-19T16:07:50+00:00

This commit changes the working directory
where the build process occurs.

Before this commit, build process occurred under the source
tree for both in-tree and out-of-tree build.

That's why we needed to add $(obj) prefix to all generated
files in makefiles like follows:
  $(obj)u-boot.bin:  $(obj)u-boot

Here, $(obj) is empty for in-tree build, whereas it points
to the output directory for out-of-tree build.

And our old build system changes the current working directory
with "make -C " syntax when descending into the
sub-directories.

On the other hand, Kbuild uses a different idea
to handle out-of-tree build and directory descending.

The build process of Kbuild always occurs under the output tree.
When "O=dir/to/store/output/files" is given, the build system
changes the current working directory to that directory and
restarts the make.

Kbuild uses "make -f $(srctree)/scripts/Makefile.build obj="
syntax for descending into sub-directories.
(We can write it like "make $(obj)=" with a shorthand.)
This means the current working directory is always the top
of the output directory.

Signed-off-by: Masahiro Yamada 
Tested-by: Gerhard Sittig

Makefile: make directories by Makefile.build

2013-11-17T19:11:31+00:00

Signed-off-by: Masahiro Yamada

Makefile: convert makefiles to Kbuild style and delete grep switch

2013-11-01T15:42:13+00:00

We have converted all makefiles needed to build $(LIBS).

Until this commit we used to grep switch so that U-Boot style
and Kbuild style makefiles coexist.
But we do not need any more.

Goint forward, use always Kbuild style Makefile when adding
a new Makefile

Signed-off-by: Masahiro Yamada

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

tegra: move common features to a common makefile

2012-10-29T16:07:04+00:00

For Non-Nvidia boards to include newly added features (like emc clock
scaling) it would be necessary to add each feature to their own board
Makefile. This is because currently the top Makefile automaticly includes
these features only for Nvidia boards.

This patch adds a simple Makefile include so all new features become
available for non-Nvidia board vendors.

Cc: Stephen Warren 
Cc: Tom Warren 
Cc: Thierry Reding 
Cc: Lucas Stach 
Signed-off-by: Marc Dietrich 
Acked-by: Stephen Warren 
Acked-by: Thierry Reding 
Signed-off-by: Tom Warren