u-boot.git/board/avionic-design, branch v2012.07

tegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build switches

2012-07-09T20:44:32+00:00

Missed some boards after my tegra2_mmc.* -> tegra_mmc.* change, and
one instance of CONFIG_TEGRA2_SPI. MAKEALL -s tegra2 AOK, Seaboard MMC
AOK. Didn't test Tamonten, Paz00 or TrimSlice, as I have none here.

Signed-off-by: Tom Warren 
Acked-by: Stephen Warren

tegra: Add Tamonten Evaluation Carrier support

2012-07-09T20:44:32+00:00

The Tamonten Evaluation Carrier is an evaluation board for the Tamonten
processor board. More information is available here:

	http://www.avionic-design.de/en/products/nvidia-tegra-tamonten-system-en/nvidia-tegra-tamonten-evboard-en.html

Signed-off-by: Thierry Reding 
Acked-by: Stephen Warren 
Signed-off-by: Tom Warren

tegra: Use SD write-protect GPIO on Tamonten

2012-07-09T20:44:32+00:00

GPIO PI6 can be used to obtain the write-protect status of an SD card
inserted into the SD slot.

Signed-off-by: Thierry Reding 
Acked-by: Stephen Warren 
Signed-off-by: Tom Warren

tegra: Implement gpio_early_init() on Tamonten

2012-07-09T20:44:32+00:00

The PI4 GPIO is used on Tamonten to reset carrier board peripherals.
Power sequencing hardware on the carrier pulls the reset low before
powering up the Tegra, and the CPU is supposed to signal readiness,
and therefore bring peripherals out of reset by pulling PI4 high.

Signed-off-by: Thierry Reding 
Acked-by: Stephen Warren 
Signed-off-by: Tom Warren

tegra: plutux: Add device tree support

2012-07-09T20:44:32+00:00

Device tree support is required for working USB host support, which in
turn enables ethernet support.

Signed-off-by: Thierry Reding 
Acked-by: Stephen Warren 
Signed-off-by: Tom Warren

tegra: medcom: Add device tree support

2012-07-09T20:44:32+00:00

Device tree support is required for working USB host support, which in
turn enables ethernet support.

Signed-off-by: Thierry Reding 
Acked-by: Stephen Warren 
Signed-off-by: Tom Warren

tegra: Rework Tamonten support

2012-07-09T20:44:32+00:00

This commit uses the common Tegra board implementation instead of
duplicating a lot of the code. In addition, the Plutux and Medcom
specific board files can be removed as the MMC/SD setup is common
among all Tamonten-based boards.

Signed-off-by: Thierry Reding 
Acked-by: Stephen Warren 
Signed-off-by: Tom Warren

tegra: Use funcmux for MMC on tamonten

2012-02-12T09:11:22+00:00

Use the new funcmux_select() feature to set up the MMC pin mux.

Signed-off-by: Simon Glass 
Signed-off-by: Tom Warren

tegra: Move boards over to use arch-level board UART function

2011-12-24T09:23:32+00:00

Now that we can set up the UART in common tegra code, make the boards
use it.

Signed-off-by: Simon Glass 
Acked-by: Stephen Warren 
Signed-off-by: Tom Warren

tegra2: Add Avionic Design Medcom support.

2011-12-24T09:23:32+00:00

The Medcom is a 16:9 15" terminal that is used for patient infotainment
in hospitals.

Changes in v3:
  * Remove unused implementation of gpio_config_uart().
  * Implement MMC/SD card detection.
  * Drop board_mmc_getcd() which is now implemented by common Tegra2
    code.
  * Add MAINTAINERS entry.

Changes in v2:
  * No longer override the default CONFIG_SYS_TEXT_BASE setting.

Signed-off-by: Thierry Reding 
Acked-by: Simon Glass 
Signed-off-by: Tom Warren