u-boot.git/board/avionic-design, branch v2012.10

Tegra: Change Tegra20 to Tegra in common code, prep for T30

2012-09-10T20:01:24+00:00

Convert TEGRA20_ defines to either TEGRA_ or NV_PA_ where appropriate.
Convert tegra20_ source file and function names to tegra_, also.

Upcoming Tegra30 port will use common code/defines/names where possible.

Signed-off-by: Tom Warren 
Acked-by: Stephen Warren

tegra: Enable NAND on TEC

2012-09-07T20:54:31+00:00

This commit enables NAND support on the Tamonten Evaluation Carrier and
adds the corresponding device tree nodes. Furthermore, the U-Boot
environment can now be stored in NAND.

Signed-off-by: Thierry Reding 
Signed-off-by: Tom Warren

tegra20: make board mkdir commands unconditional

2012-09-01T12:58:21+00:00

Change the mkdir commands for the object directories to be
unconditional.  This fixes an issue when building for SPL where
SRCTREE and OBJTREE are the same, but $(obj) is under SPLTREE.

Signed-off-by: Allen Martin 
Acked-by: Stephen Warren 
Tested-by: Thierry Reding 
Signed-off-by: Tom Warren

tegra20: rename tegra2 -> tegra20

2012-09-01T12:58:21+00:00

This is make naming consistent with the kernel and devicetree and in
preparation of pulling out the common tegra20 code.

Signed-off-by: Allen Martin 
Acked-by: Stephen Warren 
Tested-by: Thierry Reding 
Signed-off-by: Tom Warren

tegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build switches

2012-07-09T20:44:32+00:00

Missed some boards after my tegra2_mmc.* -> tegra_mmc.* change, and
one instance of CONFIG_TEGRA2_SPI. MAKEALL -s tegra2 AOK, Seaboard MMC
AOK. Didn't test Tamonten, Paz00 or TrimSlice, as I have none here.

Signed-off-by: Tom Warren 
Acked-by: Stephen Warren

tegra: Add Tamonten Evaluation Carrier support

2012-07-09T20:44:32+00:00

The Tamonten Evaluation Carrier is an evaluation board for the Tamonten
processor board. More information is available here:

	http://www.avionic-design.de/en/products/nvidia-tegra-tamonten-system-en/nvidia-tegra-tamonten-evboard-en.html

Signed-off-by: Thierry Reding 
Acked-by: Stephen Warren 
Signed-off-by: Tom Warren

tegra: Use SD write-protect GPIO on Tamonten

2012-07-09T20:44:32+00:00

GPIO PI6 can be used to obtain the write-protect status of an SD card
inserted into the SD slot.

Signed-off-by: Thierry Reding 
Acked-by: Stephen Warren 
Signed-off-by: Tom Warren

tegra: Implement gpio_early_init() on Tamonten

2012-07-09T20:44:32+00:00

The PI4 GPIO is used on Tamonten to reset carrier board peripherals.
Power sequencing hardware on the carrier pulls the reset low before
powering up the Tegra, and the CPU is supposed to signal readiness,
and therefore bring peripherals out of reset by pulling PI4 high.

Signed-off-by: Thierry Reding 
Acked-by: Stephen Warren 
Signed-off-by: Tom Warren

tegra: plutux: Add device tree support

2012-07-09T20:44:32+00:00

Device tree support is required for working USB host support, which in
turn enables ethernet support.

Signed-off-by: Thierry Reding 
Acked-by: Stephen Warren 
Signed-off-by: Tom Warren

tegra: medcom: Add device tree support

2012-07-09T20:44:32+00:00

Device tree support is required for working USB host support, which in
turn enables ethernet support.

Signed-off-by: Thierry Reding 
Acked-by: Stephen Warren 
Signed-off-by: Tom Warren