u-boot.git/board/bachmann, branch v2015.04Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/board/bachmann?h=v2015.042015-01-22T10:03:19Zot1200: add basic SPL support2015-01-22T10:03:19ZChristian Gmeinerchristian.gmeiner@gmail.com2015-01-19T16:26:49Zurn:sha1:532491712610ef903e5f53b1da799fc0011829e0
Currently we only support the Micron MT41K128M16JT-125 ddr3 chip.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
ot1200: enable spi clock directly in ccgr_init(..)2015-01-22T10:03:19ZChristian Gmeinerchristian.gmeiner@gmail.com2015-01-19T16:26:47Zurn:sha1:e88b83575a94b76a57161d98ec659460cb83ffab
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
ot1200: move ccgr and gpr init to c functions2015-01-22T10:03:19ZChristian Gmeinerchristian.gmeiner@gmail.com2015-01-19T16:26:46Zurn:sha1:84c5dd16a45cc6502bf622ea33543a53102d681f
We need this way for SPL boot.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
ot1200: make use of imx_ddr_size(..)2015-01-22T10:03:18ZChristian Gmeinerchristian.gmeiner@gmail.com2015-01-19T16:26:45Zurn:sha1:f77dd6d7dbe42cee2b03d1b4c8b34ceb15643174
To support different ddr3 memory sizes we should start using
imx_ddr_size(..) instead of the define PHYS_SDRAM_SIZE.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
ot1200: Fix error handling in board_mmc_init()2014-11-24T11:10:18ZFabio Estevamfabio.estevam@freescale.com2014-11-21T18:42:56Zurn:sha1:e37197acad30928b434c54842642b11ce5f3639b
When an invalid USDHC port is passed we should return -EINVAL instead of 0.
Also, return the error immediately on fsl_esdhc_initialize() failure.
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
ot1200: fix card detect for usdhc42014-11-13T15:23:38ZChristian Gmeinerchristian.gmeiner@gmail.com2014-11-11T11:57:05Zurn:sha1:cb0b6986b00a429c7a12596bbcbc52aca73773f4
Today I got the final board and found out that a different
connector is used as the one on my development board. The
new connector has swaped pins for cd and wp.
This change is tested on a production ready board.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Merge branch 'master' of git://www.denx.de/git/u-boot-imx2014-11-05T17:48:09ZTom Rinitrini@ti.com2014-11-05T17:48:09Zurn:sha1:625509ab0edbb7d943ad9028de3c21ca48aa58beot1200: rework card detect for eMMC2014-10-30T09:46:28ZChristian Gmeinerchristian.gmeiner@gmail.com2014-10-23T11:46:43Zurn:sha1:56740fa96f338025bf1c75e84a77120423f16680
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
ot1200: add support for usdhc42014-10-30T09:46:28ZChristian Gmeinerchristian.gmeiner@gmail.com2014-10-23T11:46:42Zurn:sha1:5a9ca420ce8d90e668c5e0660881f16328984fb0
On the 'mr' variant switching to 'mmc dev 1' will result
in "MMC: no card present".
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
ot1200: add feature pads2014-10-30T09:46:28ZChristian Gmeinerchristian.gmeiner@gmail.com2014-10-23T11:46:41Zurn:sha1:1199ddce9c3e5dd25acffe7d7e7999ff779ac832
The older 'mr' variant and the generic variant of the
OT1200 differ in some places. As the name suggests the
generic variant supports more boot devices.
In order to be compatible with the 'mr' variant we define
some 'feature' GPIOs. On the 'mr' variant this pads are
not connected so we define their state with the help
of the internal pullups.
On the generic variant this GPIOs are connected and
represent the state of the hardware.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>