u-boot.git/board/bachmann, branch v2016.01 Unnamed repository; edit this file 'description' to name the repository. ot1200: Remove empty reset_cpu() 2015-11-12T16:26:33+00:00 Fabio Estevam fabio.estevam@freescale.com 2015-11-03T00:21:35+00:00 db4ecd1fe844b837c49287eaec96f03aeb7296bc There is really no need to provide an empty reset_cpu() implementation, so just remove it. Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com> 
There is really no need to provide an empty reset_cpu() implementation,
so just remove it.

Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
ot1200: Fix the error handling in board_eth_init() 2015-09-13T09:05:31+00:00 Fabio Estevam fabio.estevam@freescale.com 2015-09-11T03:53:52+00:00 cbb8f9676c17e7c1c0aa71552cf0e5700055c146 We should not return 0 on failure, so return a negative error code instead. Also centralize the error path so that is easier to follow. Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> 
We should not return 0 on failure, so return a negative error code
instead.

Also centralize the error path so that is easier to follow.

Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
mx6: remove SYS_SOC from board Kconfig 2015-09-13T08:37:29+00:00 Peng Fan Peng.Fan@freescale.com 2015-09-07T06:59:48+00:00 f20562e4c40adc3a16cfce4d7715e77969eccd0a Remove duplicated SYS_SOC Kconfig entry from board Kconfig, because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Stefan Roese <sr@denx.de> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: "Eric Bénard" <eric@eukrea.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Marek Vasut <marex@denx.de> Cc: Markus Niebel <Markus.Niebel@tq-group.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com> Acked-by: Markus Niebel <Markus.Niebel@tq-group.com> Acked-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> 
Remove duplicated SYS_SOC Kconfig entry from board Kconfig,
because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Markus Niebel <Markus.Niebel@tq-group.com>
Acked-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
ot1200: setup i2c bus 1 in setup_iomux_i2c() 2015-06-08T06:48:32+00:00 Christian Gmeiner christian.gmeiner@gmail.com 2015-06-03T09:33:23+00:00 130e6c8cbd9c255da218e9fa1a136c065808aa93 On this bus there is a EEPROM containing EDID and ddr3 calibration information. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> 
On this bus there is a EEPROM containing EDID and ddr3
calibration information.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
ot1200: setup i2c bus in board_early_init_f(..) 2015-06-08T06:48:15+00:00 Christian Gmeiner christian.gmeiner@gmail.com 2015-06-03T09:33:22+00:00 cefe06bf84c3093c875f19490841ff12e0939bda Make it possible to use the i2c bus in SPL. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> 
Make it possible to use the i2c bus in SPL.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
ot1200: add basic SPL support 2015-01-22T10:03:19+00:00 Christian Gmeiner christian.gmeiner@gmail.com 2015-01-19T16:26:49+00:00 532491712610ef903e5f53b1da799fc0011829e0 Currently we only support the Micron MT41K128M16JT-125 ddr3 chip. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> 
Currently we only support the Micron MT41K128M16JT-125 ddr3 chip.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
ot1200: enable spi clock directly in ccgr_init(..) 2015-01-22T10:03:19+00:00 Christian Gmeiner christian.gmeiner@gmail.com 2015-01-19T16:26:47+00:00 e88b83575a94b76a57161d98ec659460cb83ffab Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> 
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
ot1200: move ccgr and gpr init to c functions 2015-01-22T10:03:19+00:00 Christian Gmeiner christian.gmeiner@gmail.com 2015-01-19T16:26:46+00:00 84c5dd16a45cc6502bf622ea33543a53102d681f We need this way for SPL boot. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> 
We need this way for SPL boot.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
ot1200: make use of imx_ddr_size(..) 2015-01-22T10:03:18+00:00 Christian Gmeiner christian.gmeiner@gmail.com 2015-01-19T16:26:45+00:00 f77dd6d7dbe42cee2b03d1b4c8b34ceb15643174 To support different ddr3 memory sizes we should start using imx_ddr_size(..) instead of the define PHYS_SDRAM_SIZE. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> 
To support different ddr3 memory sizes we should start using
imx_ddr_size(..) instead of the define PHYS_SDRAM_SIZE.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
ot1200: Fix error handling in board_mmc_init() 2014-11-24T11:10:18+00:00 Fabio Estevam fabio.estevam@freescale.com 2014-11-21T18:42:56+00:00 e37197acad30928b434c54842642b11ce5f3639b When an invalid USDHC port is passed we should return -EINVAL instead of 0. Also, return the error immediately on fsl_esdhc_initialize() failure. Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> 
When an invalid USDHC port is passed we should return -EINVAL instead of 0.

Also, return the error immediately on fsl_esdhc_initialize() failure.

Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>