u-boot.git/board/boundary, branch v2015.01

nitrogen6x: Fix error handling in board_mmc_init()

2014-11-24T11:10:18Z

When an invalid USDHC port is passed we should return -EINVAL instead of 0. Also, return the error immediately on fsl_esdhc_initialize() failure. Cc: Eric Nelson Signed-off-by: Fabio Estevam

kconfig: arm: introduce symbol for ARM CPUs

2014-10-29T13:02:09Z

This commit introduces a Kconfig symbol for each ARM CPU: CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136, CPU_ARM1176, CPU_V7, CPU_PXA, CPU_SA1100. Also, it adds the CPU feature Kconfig symbol HAS_VBAR which is selected for CPU_ARM1176 and CPU_V7. For each target, the corresponding CPU is selected and the definition of SYS_CPU in the corresponding Kconfig file is removed. Also, it removes redundant "string" type in some Kconfig files. Signed-off-by: Georges Savoundararadj Acked-by: Albert ARIBAUD Cc: Masahiro Yamada

ARM: i.MX: provide declaration for board_spi_cs_gpio

2014-10-21T08:47:14Z

Provide a public declaration of the board_spi_cs_gpio() callback for i.MX SPI chip selects to prevent the warning "Should it be static?" when compiling with "make C=1". Signed-off-by: Eric Nelson

Merge remote-tracking branch 'u-boot-imx/master'

2014-10-08T19:20:49Z

The single file conflict below is actually trivial. Conflicts: board/boundary/nitrogen6x/nitrogen6x.c

nitrogen6x: display use I2C detect for HDMI

2014-10-06T15:57:22Z

The HPD pin and RX_SENSE registers have proven to be less reliable than using I2C on the EDID pins for detection of an HDMI monitor. In particular, when the HDMI output is reset through a "reboot" cycle, the detect_hdmi() routine often bounces, resulting in a failure to detect a connected monitor. Signed-off-by: Eric Nelson

nitrogen6x: display: add wvga-lvds panel

2014-10-06T15:57:22Z

Add support for WVGA (800x480) panels using VESA GTF timings over LVDS. No auto-detection is supported, so you must configure this panel manually through the 'panel' environment variable: U-Boot > setenv panel svga U-Boot > saveenv && reset Signed-off-by: Eric Nelson

nitrogen6x: display: add Ampire 1024x600 panel

2014-10-06T15:57:22Z

Add support for an Ampire 1024x600 LVDS panel with integrated Ilitek capacitive touch screen. Auto-detection is enabled, so no explicit configuration is needed. Signed-off-by: Eric Nelson

nitrogen6x: display: add svga display (800x600)

2014-10-06T15:57:22Z

Add support for 800x600 18-bit RGB displays using VESA GTF timings. No auto-detection is supported, so you must configure this panel manually through the 'panel' environment variable: U-Boot > setenv panel svga U-Boot > saveenv && reset Signed-off-by: Eric Nelson

nitrogen6x: display: add support for fusion 7 display

2014-10-06T15:57:22Z

Add support for the Touch Revolution Fusion7 display: 800x480 RGB with a custom F0710A resistive touch controller. Auto-detection of this panel is supported so no configuration is required. Signed-off-by: Eric Nelson

nitrogen6x: display: add LDB-WXGA-S for SPWG 1280x800 displays

2014-10-06T15:57:22Z

This patch adds support for LVDS WXGA displays that use the SPWG encoding standard instead of JEIDA. No auto-detection is enabled and you must explicitly set the 'panel' environment variable: U-Boot > setenv panel LDB-WXGA-S U-Boot > saveenv && reset Signed-off-by: Eric Nelson