u-boot.git/board/boundary, branch v2020.01

nitrogen6x: prepare for CONFIG_MX6QDL

2019-12-27T13:28:28Z

The next patch adds CONFIG_MX6QDL so that errata will be enabled again. Signed-off-by: Troy Kisky

imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB

2019-10-08T14:36:37Z

CONFIG_SECURE_BOOT is too generic and forbids to use it for cross architecture purposes. If Secure Boot is required for imx, this means to enable and use the HAB processor in the soc. Signed-off-by: Stefano Babic

nitrogen6x: reserve used gpios

2019-10-08T14:35:16Z

This prevents messages like gpio@20a0000: get_value: error: gpio GPIO2_2 not reserved when CONFIG_DM_GPIO is enabled. Also, when CONFIG_DM_GPIO is enabled, checkboard is too early to use gpio_get_value, so read it directly on failure. Signed-off-by: Troy Kisky

nitrogen6x: migrate to using device tree

2019-10-08T14:35:16Z

Migrate to using device tree required for further driver model integration. Signed-off-by: Troy Kisky

env: Move env_set_hex() to env.h

2019-08-11T20:43:41Z

Move env_set_hex() over to the new header file along with env_set_addr() which uses it. Signed-off-by: Simon Glass Acked-by: Joe Hershberger

Convert to use fsl_esdhc_imx for i.MX platforms

2019-06-23T06:18:34Z

Converted to use fsl_esdhc_imx for i.MX platforms. Signed-off-by: Yangbo Lu Tested-by: Steffen Dirkwinkel Reviewed-by: Peng Fan Reviewed-by: Lukasz Majewski Reviewed-by: Martyn Welch Acked-by: Jason Liu

imx: mx6qsabrelite: Update the SabreLite README

2019-03-13T08:14:35Z

The information in the SabreLite README is inaccurate and sparse. The upstream U-Boot can boot the SabreLite from SPI-NOR. Additionally, the freely available imx_loader tool can be easily used to boot a board with a corrupted SPI, the official Freescale/NXP manufacturing tools are not required. Reformat the document, adding a description of how to boot from SPI-NOR and adding a brief description of how to recover the board should the SPI-NOR be corrupted using imx_loader. Signed-off-by: Martyn Welch Acked-by: Troy Kisky

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

env: Rename getenv/_f() to env_get()

2017-08-16T12:30:24Z

We are now using an env_ prefix for environment functions. Rename these two functions for consistency. Also add function comments in common.h. Quite a few places use getenv() in a condition context, provoking a warning from checkpatch. These are fixed up in this patch also. Suggested-by: Wolfgang Denk Signed-off-by: Simon Glass

env: Rename common functions related to setenv()

2017-08-16T12:23:32Z

We are now using an env_ prefix for environment functions. Rename these commonly used functions, for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk Signed-off-by: Simon Glass