u-boot.git/board/broadcom/bcmbca/Kconfig, branch master

arm: bcmbca: add bcm6855 SoC support under CONFIG_ARCH_BCMBCA

2022-10-31T12:55:59+00:00

BCM6855 is a Broadcom ARM A7 based PON Gateway SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family. Like other
broadband SoC, this patch adds it under CONFIG_BCM6855 chip config and
CONFIG_ARCH_BCMBCA platform config.

This initial support includes a bare-bone implementation and dts with
CPU subsystem, memory and ARM PL101 uart. This SoC is supported in the
linux-next git repository so the dts and dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang 
Reviewed-by: Philippe Reynes

arm: bcmbca: add bcm6858 SoC support under CONFIG_ARCH_BCMBCA

2022-10-31T12:55:51+00:00

BCM6858 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family. Like other broadband
SoC, this patch adds it under CONFIG_BCM6858 chip config and
CONFIG_ARCH_BCMBCA platform config.

This initial support includes a bare-bone implementation and the
original dts is updated with the one from linux next git repository.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang 
Reviewed-by: Philippe Reynes

arm: bcmbca: add bcm6856 SoC support under CONFIG_ARCH_BCMBCA

2022-10-31T12:55:41+00:00

BCM6856 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family. Like other Broadband
SoC, this patch adds it under CONFIG_BCM6856 chip config and
CONFIG_ARCH_BCMBCA platform config.

This initial support includes a bare-bone implementation and dts with
CPU subsystem, memory and Broadcom uart. This SoC is supported in the
linux-next git repository so the dts and dtsi files are copied from
linux.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang 
Reviewed-by: Philippe Reynes

arm: bcmbca: add bcm63158 SoC support under CONFIG_ARCH_BCMBCA

2022-10-31T12:54:44+00:00

BCM63158 is a Broadcom B53 based DSL Gateway SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family. Like other
Broadband SoC, this patch adds it under CONFIG_BCM63158 chip
config and CONFIG_ARCH_BCMBCA platform config.

This initial support includes a bare-bone implementation and dts with
CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the
linux-next git repository so the dts and dtsi files are copied from
linux.

The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there to the console.

Signed-off-by: William Zhang 
Reviewed-by: Philippe Reynes

arm: bcmbca: add bcm4908 SoC support

2022-10-31T12:54:44+00:00

BCM4908 is a Broadcom B53 based WLAN AP router SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added
under ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and Broadcom uart.

This SoC is supported in the linux git repository so the dts and dtsi
files are stripped down version of linux copies with mininum blocks
needed by u-boot.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang 
Reviewed-by: Florian Fainelli

arm: bcmbca: add bcm6813 SoC support

2022-10-31T12:54:43+00:00

BCM6813 is a Broadcom B53 based PON and WLAN AP router SoC. It is part
of the BCA (Broadband Carrier Access origin) chipset family so it's
added under ARCH_BCMBCA platform. This initial support includes a
bare-bone implementation and dts with CPU subsystem, memory and ARM
PL011 uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang 
Reviewed-by: Florian Fainelli

arm: bcmbca: add bcm4912 SoC support

2022-10-31T12:54:43+00:00

BCM4912 is a Broadcom B53 based WLAN AP router SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011 uart.

This SoC is supported in the linux-next git repository so the dts
and dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there to the console.

Signed-off-by: William Zhang 
Reviewed-by: Florian Fainelli

arm: bcmbca: add bcm63146 SoC support

2022-10-31T12:54:43+00:00

BCM63146 is a Broadcom B53 based DSL Broadband SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011 uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

Signed-off-by: William Zhang 
Reviewed-by: Florian Fainelli

arm: bcmbca: add bcm63138 SoC support

2022-10-31T12:54:43+00:00

BCM63138 is an ARM A9 based DSL Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory, ARM A9 global timer
and Broadcom uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are stripped down version of linux copies with mininum blocks
needed by u-boot.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.

This patch applies on top of the my previous patch [1].

[1] https://lists.denx.de/pipermail/u-boot/2022-August/490570.html

Signed-off-by: William Zhang 
Reviewed-by: Florian Fainelli 
Reviewed-by: Philippe Reynes

arm: bcmbca: add bcm63148 SoC support

2022-10-31T12:54:43+00:00

BCM63148 is an Broadcom B15 based DSL Broadband SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and Broadcom uart.

This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.

The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there.

Signed-off-by: William Zhang