u-boot.git/board/compulab, branch v2015.01-rc2

arm: mx6: cm_fx6: implement board specific sata stop

2014-11-24T11:00:00Z

Provide board specific implementation for sata stop command for cm_fx6. Signed-off-by: Nikita Kiryanov Cc: Stefano Babic

mx6: Use a common SPL configuration file

2014-11-20T09:30:18Z

Many boards use a minimal .cfg file in the SPL case. Introduce spl_sd.cfg so that we can reuse it. Signed-off-by: Fabio Estevam Acked-by: Stefano Babic

Merge git://git.denx.de/u-boot-ti

2014-11-07T21:18:35Z

omap3: cm-t3517: add LCD/DVI and splash support

2014-11-06T16:04:42Z

Add support for splash screen on both DVI and SCF0403 LCD. Signed-off-by: Igor Grinberg Reviewed-by: Tom Rini

omap3: cm-t3517: add Ethernet support

2014-11-06T16:04:41Z

Add both EMAC and SMC911x support. Signed-off-by: Igor Grinberg Reviewed-by: Tom Rini

omap3: cm-t3517: add USB support

2014-11-06T16:04:41Z

Add both host and mUSB support. Currently, the selection between host USB and mUSB is done through the config file. Signed-off-by: Igor Grinberg Reviewed-by: Tom Rini

omap3: cm-t3517: add basic board support

2014-11-06T16:04:41Z

CompuLab cm-t3517 is Computer on Module (CoM) based on AM3517 SoC. Features: up to 256MB DDR2, up to 512MB NAND, USB hub, mUSB, WiFi, BT, Analog audio codec, touch screen controller, LED. Add basic support including: LED, Serial console, NAND, MMC, GPIO, I2C, 256MB DRAM. Signed-off-by: Igor Grinberg

omap: hsmmc: assume cd gpio is active low

2014-11-06T16:04:41Z

Switch the default CD GPIO polarity to active low. The current hsmmc driver assumption that the CD GPIO is active high, but in the real hardware, usually the opposite holds. The usual SD card socket has a mechanical switch which is grounded as soon as a card is inserted. Of course there might be some board logic which inverts the signal, but as far as current users are concerned, there is no such logic. Current U-Boot users either not using the CD functionality, or have a different way (e.g. external to SoC GPIO controller) for checking the card presence. This patch also brings the polarity assumption in line with the Linux kernel and adds appropriate comments. This patch also might spare issues once the TWL GPIO driver will be converted to the DM. Signed-off-by: Igor Grinberg Cc: Pantelis Antoniou Cc: Dmitry Lifshitz Reviewed-by: Tom Rini

omap3: cm-t35: move get_board_serial() fallback

2014-11-06T16:04:41Z

The fallback is used for cases when CONFIG_SERIAL_TAG defined, but the eeprom is not used. The fallback is useful for more than one CompuLab board, so move it to a common location. Signed-off-by: Igor Grinberg Reviewed-by: Tom Rini

omap3: cm-t35: move the SMC911x code

2014-11-06T16:04:40Z

Extract the SMC911x initialization code to a common location where it can be reused by other compulab omap3 based boards. Signed-off-by: Igor Grinberg Reviewed-by: Tom Rini