u-boot.git/board/compulab, branch v2016.05

omap-common: Rename set_muxconf_regs_essential to set_muxconf_regs

2016-03-15T19:12:06+00:00

There is no distinction between essential and non-essential mux configuration,
so it doesn't make sense to have an "essential" prefix.

Signed-off-by: Paul Kocialkowski

arm: am437x: cm-t43: set MPU and CORE voltages on boot

2016-02-24T23:44:09+00:00

During boot, U-Boot raises the CPU frequency but the CORE and MPU regulators
are not updated. This is not a problem in cold boot since the default values
that the pmic outputs are correct, but if Linux were to switch the module to a
low power OPP, the new voltage values will be retained after a reboot and the
module will likely hang once U-Boot raises the CPU frequency back up.

Set both CORE and MPU regulators to to 1.1V on boot.

Cc: Tom Rini 
Cc: Albert Aribaud 
Cc: Igor Grinberg 
Signed-off-by: Nikita Kiryanov 
Reviewed-by: Tom Rini

arm: am437x: cm-t43: get rid of enable_vtt_regulator()

2016-02-24T23:44:08+00:00

CM-T43 does not have a vtt regulator. Remove the function that's supposed
to enable it.

Cc: Tom Rini 
Cc: Albert Aribaud 
Cc: Igor Grinberg 
Signed-off-by: Nikita Kiryanov 
Reviewed-by: Tom Rini

arm: am437x: cm-t43: set tps fseal bit

2016-02-24T23:44:08+00:00

Set TPS65218 FSEAL bit to 1 so that RTC could be powered using on-board
3V battery. This is necessary so that time and date will survive reboots and
power offs.

Cc: Tom Rini 
Cc: Albert Aribaud 
Cc: Igor Grinberg 
Signed-off-by: Nikita Kiryanov 
Reviewed-by: Tom Rini

arm: am437x: cm-t43: split board file

2016-02-24T23:44:06+00:00

Simplify the board file by splitting it to spl portion and u-boot portion.
Some unnecessary includes were identified and removed. No functional changes.

Cc: Tom Rini 
Cc: Albert Aribaud 
Cc: Igor Grinberg 
Signed-off-by: Nikita Kiryanov 
Reviewed-by: Tom Rini

dm: tegra: net: Convert tegra boards to driver model for Ethernet

2016-01-12T17:19:09+00:00

Adjust all Tegra boards to use driver model for Ethernet, now that the
required drivers are converted.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng 
Acked-by: Joe Hershberger

omap3: cm-t3517: add board specific get_board_rev()

2015-11-18T19:50:06+00:00

CM-T3517 has several HW revisions.
Add board specific get_board_rev() callback to retrieve revision number.

Signed-off-by: Dmitry Lifshitz 
Reviewed-by: Igor Grinberg

arm: mx6: cm-fx6: define fallback boot devices for spl

2015-11-18T19:50:05+00:00

Use spl alternate boot device feature to define fallback to
the main boot device as it is defined by hardware.

Signed-off-by: Nikita Kiryanov 
Cc: Igor Grinberg 
Cc: Stefano Babic 
Cc: Tom Rini 
Reviewed-by: Tom Rini 
Reviewed-by: Stefano Babic

arm: mx6: cm-fx6: add splash locations to cm-fx6

2015-11-16T11:01:36+00:00

Add the following splash locations to cm-fx6:
* filesystem formatted mmc
* filesystem formatted usb
* filesystem formatted sata

Cc: Igor Grinberg 
Cc: Tom Rini 
Signed-off-by: Nikita Kiryanov 
Acked-by: Igor Grinberg

splash_source: add support for filesystem formatted mmc

2015-11-16T11:01:35+00:00

Add support for loading splash image from an SD card formatted with
a filesystem. Update boards to maintain original behavior where needed.

Cc: Igor Grinberg 
Cc: Tom Rini 
Signed-off-by: Nikita Kiryanov