u-boot.git/board/congatec/common/Makefile, branch master Unnamed repository; edit this file 'description' to name the repository. kbuild: Bump the build system to 5.1 2025-07-08T19:10:03+00:00 Ilias Apalodimas ilias.apalodimas@linaro.org 2025-06-27T18:57:16+00:00 5f520875bdf0ff1269e535fe215ec0ce481c7792 Our last sync with the kernel was 5.1. Even that was a partial one as some patches from 4.x kernels were already missing making the transition to a modern kbuild infeasible. We are so out of sync now, that tracking the patches and backporting them one by one makes little sense and it's going to take ages. This is an attempt to sync up Makefile[.lib/.kbuild]. Unfortunately due to sheer amount of patches this is not easy to review, but that's what we decided during a community call. One of the biggest changes is get rid of partial linking entirely and build .a archives isntead of .o. We diaviate from the kernel on that. Instead of calling a custom script to create the archive symbol table, we call ar with rcTP (isntead of rcSTP) since we want a resulting archive that's sauble with the linker. The only affected platforms are PPC ones. Unfortunately I don't have any of them around to test, but the objdump of the resulting files -- arch/powerpc/lib/built-in.[oa] looks identical. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> 
Our last sync with the kernel was 5.1. Even that was a partial one
as some patches from 4.x kernels were already missing making the
transition to a modern kbuild infeasible.

We are so out of sync now, that tracking the patches and backporting
them one by one makes little sense and it's going to take ages.

This is an attempt to sync up Makefile[.lib/.kbuild].
Unfortunately due to sheer amount of patches this is not easy to review,
but that's what we decided during a community call.

One of the biggest changes is get rid of partial linking entirely and
build .a archives isntead of .o.
We diaviate from the kernel on that. Instead of calling a custom script
to create the archive symbol table, we call ar with rcTP (isntead of
rcSTP) since we want a resulting archive that's sauble with the linker.

The only affected platforms are PPC ones. Unfortunately I don't have any
of them around to test, but the objdump of the resulting files --
arch/powerpc/lib/built-in.[oa] looks identical.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
board: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILD 2024-10-11T17:44:48+00:00 Simon Glass sjg@chromium.org 2024-09-30T01:49:47+00:00 dac3ce976a9b06be5aadbd857c4b64a8c521c6d4 Use the new symbol to refer to any 'SPL' build, including TPL and VPL Signed-off-by: Simon Glass <sjg@chromium.org> 
Use the new symbol to refer to any 'SPL' build, including TPL and VPL

Signed-off-by: Simon Glass <sjg@chromium.org>
Convert CONFIG_SPL_INIT_MINIMAL et al to Kconfig 2022-06-06T16:09:00+00:00 Tom Rini trini@konsulko.com 2022-05-13T16:26:35+00:00 b35316fb67cb7aeaf022032ce078135251372f39 This converts the following to Kconfig: CONFIG_SPL_INIT_MINIMAL CONFIG_SPL_FLUSH_IMAGE CONFIG_SPL_SKIP_RELOCATE Signed-off-by: Tom Rini <trini@konsulko.com> 
This converts the following to Kconfig:
   CONFIG_SPL_INIT_MINIMAL
   CONFIG_SPL_FLUSH_IMAGE
   CONFIG_SPL_SKIP_RELOCATE

Signed-off-by: Tom Rini <trini@konsulko.com>
imx: support for conga-QMX8 board 2021-06-09T11:34:09+00:00 Oliver Graute oliver.graute@kococonnector.com 2021-05-31T13:50:40+00:00 fe133eb192a8a55813a4dc5ec72ecf45ba74f65e Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> 
Add i.MX8QM qmx8 congatec board support

U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200)

CPU:   NXP i.MX8QM RevB A53 at 1200 MHz

Model: Congatec QMX8 Qseven series
Board: conga-QMX8
Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9
Boot:  SD2
DRAM:  6 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
switch to partitions #0, OK
mmc2 is current device
Net:
Error: ethernet@5b040000 address not set.
No ethernet found.

Hit any key to stop autoboot:  0

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>