u-boot.git/board/congatec/common, branch master

kbuild: Bump the build system to 5.1

2025-07-08T19:10:03+00:00

Our last sync with the kernel was 5.1. Even that was a partial one
as some patches from 4.x kernels were already missing making the
transition to a modern kbuild infeasible.

We are so out of sync now, that tracking the patches and backporting
them one by one makes little sense and it's going to take ages.

This is an attempt to sync up Makefile[.lib/.kbuild].
Unfortunately due to sheer amount of patches this is not easy to review,
but that's what we decided during a community call.

One of the biggest changes is get rid of partial linking entirely and
build .a archives isntead of .o.
We diaviate from the kernel on that. Instead of calling a custom script
to create the archive symbol table, we call ar with rcTP (isntead of
rcSTP) since we want a resulting archive that's sauble with the linker.

The only affected platforms are PPC ones. Unfortunately I don't have any
of them around to test, but the objdump of the resulting files --
arch/powerpc/lib/built-in.[oa] looks identical.

Signed-off-by: Ilias Apalodimas

board: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILD

2024-10-11T17:44:48+00:00

Use the new symbol to refer to any 'SPL' build, including TPL and VPL

Signed-off-by: Simon Glass

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03+00:00

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36+00:00

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

board: congatec: Remove and add needed includes

2024-05-06T21:07:49+00:00

Remove  from this board vendor directory and when needed
add missing include files directly.

Acked-by: Oliver Graute 
Signed-off-by: Tom Rini

arch/Kconfig.nxp: Re-organize slightly

2022-07-05T21:04:01+00:00

Make all of the CHAIN_OF_TRUST options be under a single menu and add a
comment for the rest, so the resulting config file reads more clearly.
Remove duplicate CHAIN_OF_TRUST options from
board/congatec/common/Kconfig.  Remove duplicate NXP_ESBC config
questions and move to arch/Kconfig.nxp.

Signed-off-by: Tom Rini

Convert CONFIG_SPL_INIT_MINIMAL et al to Kconfig

2022-06-06T16:09:00+00:00

This converts the following to Kconfig:
   CONFIG_SPL_INIT_MINIMAL
   CONFIG_SPL_FLUSH_IMAGE
   CONFIG_SPL_SKIP_RELOCATE

Signed-off-by: Tom Rini

Kconfig: Remove all default n/no options

2021-08-31T21:47:49+00:00

default n/no doesn't need to be specified. It is default option anyway.

Signed-off-by: Michal Simek 
[trini: Rework FSP_USE_UPD portion]
Signed-off-by: Tom Rini

imx: support for conga-QMX8 board

2021-06-09T11:34:09+00:00

Add i.MX8QM qmx8 congatec board support

U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200)

CPU:   NXP i.MX8QM RevB A53 at 1200 MHz

Model: Congatec QMX8 Qseven series
Board: conga-QMX8
Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9
Boot:  SD2
DRAM:  6 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
switch to partitions #0, OK
mmc2 is current device
Net:
Error: ethernet@5b040000 address not set.
No ethernet found.

Hit any key to stop autoboot:  0

Signed-off-by: Oliver Graute 
Cc: Stefano Babic 
Cc: Fabio Estevam 
Cc: Peng Fan 
Cc: Simon Glass 
Cc: Ye Li 
Cc: uboot-imx