u-boot.git/board/congatec, branch v2021.07

imx: support for conga-QMX8 board

2021-06-09T11:34:09Z

Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute Cc: Stefano Babic Cc: Fabio Estevam Cc: Peng Fan Cc: Simon Glass Cc: Ye Li Cc: uboot-imx

arm: Remove cgtqmx6eval board

2021-04-10T12:03:55Z

This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Otavio Salvador Signed-off-by: Tom Rini

common: Drop asm/global_data.h from common header

2021-02-02T20:33:42Z

Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include at all, so remove that include. Signed-off-by: Simon Glass Signed-off-by: Tom Rini

x86: congatec: conga-qeval20-qa3-e3845: Remove dead code

2020-09-01T05:38:38Z

start.S does nothing and can be safely removed. Makefile is still being used by the build system, so simply drop the rule from it. Signed-off-by: Andy Shevchenko Reviewed-by: Stefan Roese Reviewed-by: Bin Meng

treewide: convert bd_t to struct bd_info by coccinelle

2020-07-17T13:30:13Z

The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include #include void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: @@ typedef bd_t; @@ -bd_t +struct bd_info Signed-off-by: Masahiro Yamada

imx: convert cgtqmx6eval board to DM_VIDEO

2020-06-18T17:37:49Z

Migration to DM_VIDEO driver is long overdue. Update defconfig to enable usage of converted ipuv3 driver DM configuration. Signed-off-by: Anatolij Gustschin Cc: Otavio Salvador

common: Drop linux/delay.h from common header

2020-05-19T01:19:23Z

Move this uncommon header out of the common header. Signed-off-by: Simon Glass

common: Drop net.h from common header

2020-05-18T21:33:31Z

Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass

common: Move some board functions out of common.h

2019-12-02T23:25:21Z

A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

env: Move env_set() to env.h

2019-08-11T20:43:41Z

Move env_set() over to the new header file. Acked-by: Joe Hershberger Signed-off-by: Simon Glass