MCR boards are plugged in racks. The position in the rack can be read
in a register.

For MCR3000, that's provided by the FPGA so check it is loaded before
reading the address.

For the other boards, the FPGA is loaded by hardware so it can be
read inconditionnaly.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>

Instead of cross using cross-directory makefile directives,
add a Makefile in board/cssi/common/ directory in order to
benefit from HAVE_VENDOR_COMMON_LIB logic.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>

When equipped with the SRSA audio board, MIAE equipment
has an additional port called port F.

Initialise that port just like other ports of the board, so
that it is already configured when starting Linux kernel.

Signed-off-by: Hugo Dubois <hugo.dubois.ext@csgroup.eu>
Reviewed-by: CASAUBON Jean Michel <jean-michel.casaubon@csgroup.eu>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>

All the code used to manage the mother boards will be
common to soon to come CPU board.

Move all that code into common.c

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>

On cmpc885 board, the ethernet addresses are stored in an
EEPROM that is accessed through SPI.

A 3 bytes command is sent to the chip then the content
gets read. At the time being a single block access is
performed, ignoring the first 3 bytes read.

Reword the SPI transfer to first send 3 bytes then
receive the content of the EEPROM so that there don't be
3 dummy bytes at the beginning of the buffer.

And move the function into common.c so that it can be
reused by the board that will be added in a future patch.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>

In preparation of the new cssi board called cmpcpro which
we be introduce in a future patch, move common
functions into a dedicated file in a common directory.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>