u-boot.git/board/davedenx, branch v2012.07Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/board/davedenx?h=v2012.072011-11-11T10:36:58Zqong: Use generic function for configuring GPR register2011-11-11T10:36:58ZFabio Estevamfabio.estevam@freescale.com2011-11-09T04:15:00Zurn:sha1:f631172ed13c17a1be8cdc4114cb731726600327
Use generic function for configuring GPR register.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
qong: remove unneeded IOMUX settings2011-11-03T21:56:18ZFabio Estevamfestevam@gmail.com2011-10-20T16:01:31Zurn:sha1:199222fcd280dc7abde193e0ba4a649c5cc32fbb
On qong board some of the USBH2 pins are set via GPR register, so don need to setup
the IOMUX for each pin individually.
Other than that, these pins should not be configured as primary function because the primary
function selects SSI functionality.
Let GPR register do the work and remove the unneeded IOMUX setup.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
qong: Use mx31_set_gpr to setup USBH2 pins2011-11-03T21:56:18ZFabio Estevamfestevam@gmail.com2011-10-20T16:01:30Zurn:sha1:842d853adad65d469de47c7826866dfade4c38c4
Instead of writing directly to the GPR register, use mx31_set_gpr to setup USBH2 pins.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
imx: fix coding style2011-10-27T19:56:32ZFabio Estevamfabio.estevam@freescale.com2011-10-13T05:34:59Zurn:sha1:77f11a99e14ce10ebc3b26a39a976a0827b88f86
Fix checkpatch warning and errors in several i.MX related files.
While at it also address a checkpatch warning at arch/arm/cpu/armv7/mx5/soc.c
regarding the usage of extern in a C file.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
MX3: qong: use new pmic driver2011-10-27T19:56:31ZStefano Babicsbabic@denx.de2011-10-06T09:23:33Zurn:sha1:f33bd087c6a6b833236cb2f327cab39fe218c38c
Switch to new pmic generic driver.
Signed-off-by: Stefano Babic <sbabic@denx.de>
mx31: provide readable WEIM CS accessor2011-10-27T19:56:30ZHelmut Raigerhelmut.raiger@hale.at2011-09-29T05:45:03Zurn:sha1:47c5455a489c8e558ecb002a3a97a030ce490f9e
setup_weimcs() and some macros are added to support the setup
for i.MX31 WEIM chip selects. As a compromise between verbosity
and readability an ASCII-art'ish bit comment is used instead of
bitfields.
All i.MX31 boards have been patched to use this approach using a
helper program to verify the changes.
Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
Acked-by: Stefano Babic <sbabic@denx.de>
punt unused clean/distclean targets2011-10-15T20:20:36ZMike Frysingervapier@gentoo.org2011-10-13T06:54:57Zurn:sha1:464c79207c89f247f97b344495924eabb0c9738e
The top level Makefile does not do any recursion into subdirs when
cleaning, so these clean/distclean targets in random arch/board dirs
never get used. Punt them all.
MAKEALL didn't report any errors related to this that I could see.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
MX31: QONG: make use of GPIO framework2011-09-04T09:36:11ZStefano Babicsbabic@denx.de2011-08-21T08:52:58Zurn:sha1:9400f59267b599c622d99986799c15816459a984
Signed-off-by: Stefano Babic <sbabic@denx.de>
Remove volatile qualifier in get_ram_size() calls2011-07-17T15:11:53ZAlbert ARIBAUDalbert.u.boot@aribaud.net2011-07-03T05:55:33Zurn:sha1:a55d23ccf6cb90acb9667a46427670add9486aec
Checkpatch.pl complains about the volatile qualifier in calls to
get_ram_size(). Remove this qualifier in the prototype and in the
calls where it is useless, and leave it only in the function body
where it is needed.
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
MX31: QONG: drop config.mk2011-06-21T20:26:21ZStefano Babicsbabic@denx.de2011-06-09T14:43:26Zurn:sha1:22a9ea974bdf18e6adad5c4f80b1c60ef384690c
Remove obsolete config.mk from QONG board.
Signed-off-by: Stefano Babic <sbabic@denx.de>