u-boot.git/board/davinci, branch v2011.09

ARM: hawkboard: fix compilation of nand_spl

2011-09-10T20:27:24+00:00

Fix build problem:

nand_spl/board/davinci/da8xxevm/hawkboard_nand_spl.c: In function 'board_init_f':
nand_spl/board/davinci/da8xxevm/hawkboard_nand_spl.c:132: warning: implicit declaration of function 'nand_boot'
nand_spl/board/davinci/da8xxevm/hawkboard_nand_spl.c:133: warning: 'noreturn' function does return

Signed-off-by: Wolfgang Denk 
Cc: Syed Mohammed Khasim 
Cc: Sughosh Ganu 
Cc: Albert ARIBAUD

da8xxevm: Fix warning: unused variable 'val'

2011-09-07T20:02:07+00:00

Signed-off-by: Wolfgang Denk 
Cc: Albert ARIBAUD 
Cc: Sandeep Paulraj 
Cc: Sudhakar Rajashekhara

da850: modifications for Logic PD Rev.3 AM18xx EVM

2011-09-04T09:36:19+00:00

AHCLKR/UART1_RTS/GP0[11] pin needs to be configured for
NOR to work on Rev.3 EVM. When GP0[11] is low,
the SD0 interface will not work, but NOR flash will.

Signed-off-by: Rajashekhara, Sudhakar 
Signed-off-by: Nagabhushana Netagunte 
Signed-off-by: Sandeep Paulraj

da850: add support to wake up DSP during board init

2011-09-04T09:36:19+00:00

add support for DSP wake-up by default on DA850/OMAP-L138
during board initialization. Enable hwconfig environment and added
extra env setting through CONFIG_EXTRA_ENV_SETTINGS.
To prevent DSP from being woken up,set the environment variable as,
set hwconfig "dsp:wake=no"

Signed-off-by: Sekhar Nori 
Signed-off-by: Nagabhushana Netagunte 
Signed-off-by: Sandeep Paulraj

da850: add NOR boot mode support

2011-09-04T09:36:19+00:00

Add pin-mux support for NOR in board file and correspanding
macros to use NOR boot mode in configuration file.

Signed-off-by: Sudhakar Rajashekhara 
Signed-off-by: Nagabhushana Netagunte 
Signed-off-by: Sandeep Paulraj

Add Ethernet hardware MAC address framework to usbnet

2011-08-08T19:05:23+00:00

Built-in Ethernet adapters support setting the mac address by means of a
ethaddr environment variable for each interface (ethaddr, eth1addr, eth2addr).

This adds similar support to the USB network side, using the names
usbethaddr, usbeth1addr, etc. They are kept separate since we don't want
a USB device taking the MAC address of a built-in device or vice versa.

Signed-off-by: Simon Glass 
Tested-by: Eric Bénard

DaVinci: rename gpio_defs.h to gpio.h

2011-08-03T10:49:19+00:00

In preparation for a generic GPIO driver for the DA8xx processors,
rename  to  and fix up all files
which include it.

Signed-off-by: Laurence Withers 
Signed-off-by: Sandeep Paulraj

Remove volatile qualifier in get_ram_size() calls

2011-07-17T15:11:53+00:00

Checkpatch.pl complains about the volatile qualifier in calls to
get_ram_size(). Remove this qualifier in the prototype and in the
calls where it is useless, and leave it only in the function body
where it is needed.

Signed-off-by: Albert ARIBAUD

da850evm: fix NAND WSTROBE and TA timings

2011-05-11T21:03:15+00:00

The current NAND timings, introduced in commit
a3f88293ddd13facd734769c1664d35ab4ed681f da850evm: setup the NAND flash
timings , incorrectly set WSTROBE and TA to 0. A more recent inspection of the
values set by the Linux kernel indicates that these should be set to 1.

Set the WSTROBE and TA field of the EMIFA cycle-count timings configuration to
1 to match the values set by linux.

Signed-off-by: Ben Gardiner 
CC: Stefano Babic 
CC: Sandeep Paulraj 
CC: Scott Wood 
Signed-off-by: Sandeep Paulraj

ea20: fix libea20.o not found

2011-04-11T19:26:48+00:00

This patch fixes ea20 after commit 6d8962e814c15807dd6ac5757904be2a02d187b8
where $(obj)lib$(BOARD).a was changed to $(obj)lib$(BOARD).o in almost all the
Makefiles except ea20, probably due to merge path of the changes in 2010.12.

Signed-off-by: Ben Gardiner
CC: Sebastien Carlier 
Acked-by : Stefano Babic