u-boot.git/board/davinci, branch v2014.01

Makefile: rename all libraries to built-in.o

2013-11-17T19:11:32Z

Signed-off-by: Masahiro Yamada

board: arm: convert makefiles to Kbuild style

2013-11-01T15:42:12Z

Signed-off-by: Masahiro Yamada Cc: Albert ARIBAUD Cc: Andreas Bießmann Cc: Stefano Babic Cc: Prafulla Wadaskar Cc: Minkyu Kang Cc: Vipin Kumar Cc: Tom Warren Cc: Tom Rini

Merge branch 'master' of git://88.191.163.10/u-boot-arm

2013-08-18T18:14:34Z

Fixup an easy conflict over adding the clk_get prototype and USB_OTG defines for am33xx having moved. Conflicts: arch/arm/include/asm/arch-am33xx/hardware.h Signed-off-by: Tom Rini

video, da8xx-fb: changes for am335x usage

2013-08-10T08:38:28Z

to use this driver also on am335x based boards, the following changes are made: - struct lcd_ctrl_config lcd_cfg is now configurable through board code - controller base is configurable through define DA8XX_LCD_CNTL_BASE. To be compatible with older da8xx based boards: If this define is missing, the DAVINCI_LCD_CNTL_BASE is used - Determine LCD IP Version, and make the driver working on lcd revision register values: Version 1: 0x4C100102 Version 2: 0x4F200800 0x4F201000 Signed-off-by: Heiko Schocher Cc: Stefano Babic Cc: Anatolij Gustschin Cc: Tom Rini Acked-by: Tom Rini

video, da8xx: move da8xx-fb.h to drivers/video

2013-08-10T08:37:48Z

the da8xx-fb driver works also on am335x boards. So move the da8xx-fb.h file from arch/arm/include/asm/arch-davinci to drivers/video, so this driver can used from am335x based boards. Also add WVGA panel_type. Signed-off-by: Heiko Schocher Cc: Stefano Babic Cc: Anatolij Gustschin Cc: Tom Rini Acked-by: Tom Rini

da850evm: Use clrbits function with correct endianess

2013-07-26T20:39:10Z

The current code uses clrbits_be32 which is incorrect since we are on a little endian machine here. This patch fixes this issue and also removes some unnecessary code: Reading the current GPIO bank state is not required if we are using the SET and CLEAR GPIO registers for setting/clearing bits. Signed-off-by: Christian Riesch Cc: Nagabhushana Netagunte Cc: Rajashekhara, Sudhakar

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38Z

Signed-off-by: Wolfgang Denk [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini

remove all references to .dynsym

2013-06-21T21:04:05Z

Discard all .dynsym sections from linker scripts Remove all __dynsym_start definitions from linker scripts Remove all __dynsym_start references from the codebase Note: this touches include/asm-generic/sections.h, which is not ARM-specific, but actual uses of __dynsym_start are only in ARM, so this patch can safely go through the ARM repository. Signed-off-by: Albert ARIBAUD Tested-by: Lubomir Popov Tested-by: Jeroen Hofstee Reviewed-by: Benoît Thébaudeau

arm: da830: moved pinmux configurations to the arch tree

2013-06-10T12:54:46Z

Move pinmux configurations for the DA830 SoCs from board file to the arch tree so that it can be used for all da830 based devices. Also, avoids duplicate pinmuxing in case of NAND. Signed-off-by: Vishwanathrao Badarkhe, Manish Reviewed-by: Tom Rini Acked-by: Christian Riesch

da830: add MMC support

2013-06-10T12:43:11Z

Add MMC support for da830 boards in order to perform mmc operations(read,write and erase). Signed-off-by: Vishwanathrao Badarkhe, Manish