u-boot.git/board/davinci, branch v2018.11

board: da8xxevm: Add SPL DM for serial, spi

2018-10-10T06:23:55Z

This patch add SPL DM support for da8xxevm boards with SPL serial, SPI drivers supported via platdata. Cc: Adam Ford Signed-off-by: Jagan Teki Tested-by: Adam Ford #da850evm

ARM: davinci: omapl138_lcdk: Enable DM_MMC

2018-09-12T01:41:48Z

With DM_MMC now available, this patch enables DM_MMC for the omapl138_lcdk in U-Boot and keeps the older style for SPL. Signed-off-by: Peter Howard Signed-off-by: Adam Ford

ARM: davinci: da850evm: Support DM_MMC

2018-09-12T01:41:15Z

With the updated driver available to support DM_MMC, this patch enables DM_MMC for da850evm. Signed-off-by: Adam Ford

ARM: configs: Add da850evm_nand to boot from NAND

2018-09-12T01:37:31Z

The DA850-EVM supports booting from NAND when used with the UI expander board. da850evm_nand will create an ais file that can be burned to NAND and booted while storing the env in NAND along with some partitions tables for storing kernel, dtb and rootfs in NAND. Signed-off-by: Adam Ford

ARM: da8xxevm: README: Add NOR booting instructions

2018-08-20T11:21:28Z

The da850evm with its UI expander board can boot XIP boot from NOR flash. This adds the instructions to the readme. file. Signed-off-by: Adam Ford

dm: gpio: Add DM compatibility to GPIO driver for Davinci

2018-06-18T18:43:12Z

This adds DM_GPIO support for the davinici GPIO driver with DT support. Signed-off-by: Adam Ford

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

net: Move enetaddr env access code to env config instead of net config

2018-04-09T03:00:58Z

In order that we can use eth_env_* even when CONFIG_NET isn't set, move these functions to environment code from net code. This fixes failures such as: board/ti/am335x/built-in.o: In function `board_late_init': board/ti/am335x/board.c:752: undefined reference to `eth_env_set_enetaddr' u-boot/board/ti/am335x/board.c:766: undefined reference to `eth_env_set_enetaddr' which caters for use cases such as: commit f411b5cca48f ("board: am335x: Always set eth/eth1addr environment variable") when Ethernet is required in Linux, but not U-Boot. Signed-off-by: Alex Kiernan

arm: da850-evm: Enable DM and device tree support for da850-evm

2017-09-29T14:52:21Z

With the device tree ported and DM compatible drivers, enable: OF_CONTROL, DM_SPI, DM_SPI_FLASH and DM_SERIAL Note: DM_SERIAL is not enabled for da850evm_direct_nor_defconfig yet. Reviewed-by: Jagan Teki Signed-off-by: Adam Ford

ARM: davinci: Update da8xxevm Maintainers

2017-09-13T13:24:28Z

The e-mail addresses for DA8XXEVM BOARD and DA850_AM18XXEVM BOARD are invalid. Remove DA8XXEVM. Update DA850_AM18XXEVM to have me be the maintainer since I work for Logic PD and have access to OMAP-L138 and AM1808 EVM kits. Signed-off-by: Adam Ford Reviewed-by: Tom Rini