u-boot.git/board/denx, branch v2016.09

usb: Rename ehci-fsl.h to ehci-ci.h

2016-04-01T21:18:10Z

Most of ehci-fsl header describe USB controller designed by Chipidea and used by various SoC vendors. This patch renames it to a generic header: ehci-ci.h Contents of file are not changed (so it contains several references to freescale SoCs). Signed-off-by: Mateusz Kulikowski Acked-by: Marek Vasut Tested-by: Simon Glass

arm: at91: Add support for DENX MA5D4 SoM and EVK

2016-02-18T20:34:41Z

Add support for DENX MA5D4 SoM and MA5D4EVK board, based on the Atmel SAMA5D4 SoC. The SoM contains the SoC, eMMC, SPI NOR, SPI CAN controllers and DRAM, the baseboard contains UART connectors, ethernet port, microSD slot, LCD header, 2x CAN connector and a lot of expansion headers. Signed-off-by: Marek Vasut Cc: Andreas Bießmann Reviewed-by: Heiko Schocher Reviewed-by: Andreas Bießmann

arm: socfpga: Drop the board boilerplate

2015-12-20T02:36:51Z

Drop all the common board code, since it is not completely useless. Signed-off-by: Marek Vasut Cc: Chin Liang See Cc: Dinh Nguyen

arm: socfpga: mcvevk: Probe DWC2 UDC from OF instead of hard-coded data

2015-12-20T02:36:51Z

This patch adds the necessary OF alias for the UDC node, which let's the code locate the DWC2 UDC base address in OF instead of hard-coding it into the U-Boot binary. The code is adjusted to use the address from OF instead of the hard-coded one. Finally, the hard-coded address is removed and USB DM support is enabled. Signed-off-by: Marek Vasut Cc: Chin Liang See Cc: Dinh Nguyen Cc: Lukasz Majewski Cc: Lukasz Majewski

usb: s3c-otg: Rename usb/s3c_udc.h to usb/dwc2_udc.h

2015-12-17T20:54:41Z

The driver is actually for the Designware DWC2 controller. This patch renames the global s3c_udc.h header to dwc2_udc.h. The rename is done automatically: $ sed -i "s/s3c_udc\.h/dwc2_udc.h/g" \ `git grep "s3c_udc\.h" | cut -d : -f 1` Signed-off-by: Marek Vasut

usb: s3c-otg: Rename s3c_udc_probe() function

2015-12-17T20:54:40Z

The driver is actually for the Designware DWC2 controller. This patch is the second and final to rename global symbol, the s3c_udc_probe() function. The rename is done automatically: $ sed -i "s/s3c_udc_probe/dwc2_udc_probe/g" \ `git grep s3c_udc_probe | cut -d : -f 1` Signed-off-by: Marek Vasut

usb: s3c-otg: Rename struct s3c_plat_otg_data

2015-12-17T20:54:40Z

The driver is actually for the Designware DWC2 controller. This patch is the first to rename global symbol, the struct s3c_plat_otg_data. The rename is done automatically: $ sed -i "s/s3c_plat_otg_data/dwc2_plat_otg_data/g" \ `git grep s3c_plat_otg_data | cut -d : -f 1` Signed-off-by: Marek Vasut

arm: socfpga: mcvevk: Update DRAM clock to 400MHz

2015-09-12T18:25:00Z

The MCV SoM has DDR3-1600 DRAMs on it, update the DRAM speed to 400MHz to make use of these DRAMs completely. Signed-off-by: Marek Vasut

arm: socfpga: Add support for DENX MCV SoM and MCVEVK board

2015-09-04T09:54:21Z

Add support for DENX MCV SoM, which is CycloneV based and the associated DENX MCVEVK baseboard. The board can boot from eMMC. Ethernet and USB is supported. Signed-off-by: Marek Vasut

kconfig: arm: introduce symbol for ARM CPUs

2014-10-29T13:02:09Z

This commit introduces a Kconfig symbol for each ARM CPU: CPU_ARM720T, CPU_ARM920T, CPU_ARM926EJS, CPU_ARM946ES, CPU_ARM1136, CPU_ARM1176, CPU_V7, CPU_PXA, CPU_SA1100. Also, it adds the CPU feature Kconfig symbol HAS_VBAR which is selected for CPU_ARM1176 and CPU_V7. For each target, the corresponding CPU is selected and the definition of SYS_CPU in the corresponding Kconfig file is removed. Also, it removes redundant "string" type in some Kconfig files. Signed-off-by: Georges Savoundararadj Acked-by: Albert ARIBAUD Cc: Masahiro Yamada