u-boot.git/board/dhelectronics, branch v2022.10

ARM: imx: Deduplicate i.MX8M SNVS LPGPR unlock

2022-09-20T16:30:02Z

Pull this LPGPR unlock into common code, since it is used in multiple systems already. Signed-off-by: Marek Vasut

ARM: imx: Update DDR frequency on i.MX8M Plus DHCOM

2022-09-18T20:56:10Z

Commit 99c7cc58e12 ("ddr: imx: Add i.MX9 DDR controller driver") contains an inobvious side-effect which renders all systems using DRAM controller at 3732 MT/s unbootable. The change is located in ddrphy_init_set_dfi_clk(), where the switch case statement entry 3732 changed to entry 3733, so any board with DDR calibration data for 3732 MT/s operations needs to be updated to 3733 MT/s to match the change. Since there is currently only one such board, update the board instead of handling both 3732 and 3733 options in the driver. It is likely the NXP MX8MP RPA update will follow and use the later value too. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: Peng Fan Cc: Stefano Babic Cc: Ye Li Cc: uboot-imx Reviewed-by: Fabio Estevam

ARM: stm32: Switch DHSOM to FMC2 EBI driver

2022-09-06T13:33:07Z

Perform long overdue conversion of ad-hoc FMC2 EBI bus initialization to upstream FMC2 EBI driver. No functional change. Signed-off-by: Marek Vasut Cc: Patrice Chotard Cc: Patrick Delaunay Reviewed-by: Patrice Chotard Reviewed-by: Patrick Delaunay

ARM: stm32: DH: Use common MAC address functions

2022-08-12T20:10:49Z

To reduce code duplication, let the stm32 based DH boards use the common code for setting up their MAC addresses. Signed-off-by: Philip Oberfichtner Tested-by: Marek Vasut Reviewed-by: Marek Vasut Reviewed-by: Patrick Delaunay

ARM: imx8: DH: Use common MAC address functions

2022-08-12T20:10:49Z

To reduce code duplication, let the imx8 based DH boards use the common code for setting up their MAC addresses. Signed-off-by: Philip Oberfichtner Tested-by: Marek Vasut Reviewed-by: Marek Vasut

ARM: imx6: DH: Use common MAC address functions

2022-08-12T20:10:49Z

To reduce code duplication, let the imx6 based DH boards use the common code for setting up their MAC addresses. Signed-off-by: Philip Oberfichtner Tested-by: Marek Vasut Reviewed-by: Marek Vasut

board: dhelectronics: Implement common MAC address functions

2022-08-12T20:10:49Z

This is a starting point for unifying duplicate code in the DH board files. The functions for setting up MAC addresses are very similar for the i.MX6, i.MX8 and stm32mp1 based boards. All pre-existing implementations follow the same logic: (1) Check if ethaddr is already set in the environment (2) If not, try to get it from a board specific location (e.g. fuse) (3) If not, try to get it from eeprom After this commit, (1) and (3) are implemented as common functions, ready to be used by board specific files. Furthermore there is an implementation of (2) for imx based boards. Signed-off-by: Philip Oberfichtner Reviewed-by: Marek Vasut

Merge branch 'master' into next

2022-06-20T18:40:59Z

Merge in v2022.07-rc5.

board: dhelectronics: stm32mp1: convert to livetree

2022-06-17T12:12:27Z

Replace call to fdt_*() functions and access to gd->fdt_blob with call to ofnode_*() functions to support a live tree. Tested-by: Marek Vasut Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard

ARM: dts: stm32: Add DHCOR based DRC Compact board

2022-06-17T07:31:19Z

Add DT for DH DRC Compact unit, which is a universal controller device. The system has two ethernet ports, one CAN, RS485 and RS232, USB, uSD card slot, eMMC and SDIO Wi-Fi. Signed-off-by: Marek Vasut Cc: Patrice Chotard Cc: Patrick Delaunay Reviewed-by: Patrice Chotard Reviewed-by: Patrick Delaunay