u-boot.git/board/eets, branch v2023.07

global: Finish CONFIG -> CFG migration

2023-01-20T17:27:24Z

At this point, the remaining places where we have a symbol that is defined as CONFIG_... are in fairly odd locations. While as much dead code has been removed as possible, some of these locations are simply less obvious at first. In other cases, this code is used, but was defined in such a way as to have been missed by earlier checks. Perform a rename of all such remaining symbols to be CFG_... rather than CONFIG_... Signed-off-by: Tom Rini Reviewed-by: Simon Glass

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

2022-12-05T21:06:07Z

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini Reviewed-by: Simon Glass

global: Move remaining CONFIG_SYS_NS16550_* to CFG_SYS_NS16550_*

2022-12-05T21:06:07Z

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NS16550 namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini Reviewed-by: Simon Glass

serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE)

2022-06-06T22:01:21Z

CONFIG_VAL(DEBUG_UART_BASE) expands to CONFIG_DEBUG_UART_BASE or CONFIG_SPL_DEBUG_UART_BASE or CONFIG_TPL_DEBUG_UART_BASE and allows boards to set different values for SPL, TPL and U-Boot Proper. For ns16550 driver this support is there since commit d293759d55cc ("serial: ns16550: Add support for SPL_DEBUG_UART_BASE"). Signed-off-by: Pali Rohár

arm: pdu001: Setup pinmux for console UART as early as possible

2022-02-28T15:33:11Z

To make sure we get a working console as soon as possible in the SPL the UART pins require to be configured earlier. This is especially true for the pins of UART3, since the PDU001 board uses this UART for the console by default. Signed-off-by: Felix Brack

arm: pdu001: Fix early debugging UART

2022-02-28T15:33:11Z

The changes from commit 0dba45864b2a ("arm: Init the debug UART") prevent the early debug UART from being initialized correctly. To fix this we not just configure the pin multiplexer but add setting up early clocks. Signed-off-by: Felix Brack Reviewed-by: Tom Rini Reviewed-by: Simon Glass

arm: pdu001: Exend the list of maintained files

2022-02-03T17:15:34Z

Add the PDU001 board specific DT files to MAINTAINERS. This should help for better tracking of changes to these files. Signed-off-by: Felix Brack

Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig

2021-08-31T21:47:49Z

This converts the following to Kconfig: CONFIG_SKIP_LOWLEVEL_INIT CONFIG_SKIP_LOWLEVEL_INIT_ONLY In order to do this, we need to introduce SPL and TPL variants of these options so that we can clearly disable these options only in SPL in some cases, and both instances in other cases. Signed-off-by: Tom Rini

common: Drop asm/global_data.h from common header

2021-02-02T20:33:42Z

Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include at all, so remove that include. Signed-off-by: Simon Glass Signed-off-by: Tom Rini

common: Drop log.h from common header

2020-05-19T01:19:18Z

Move this header out of the common header. Signed-off-by: Simon Glass