u-boot.git/board/emk, branch v1.3.2

Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections

2008-01-12T19:31:39Z

With recent toolchain versions, some boards would not build because or errors like this one (here for ocotea board when building with ELDK 4.2 beta): ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab] For many boards, the .bss section is big enough that it wraps around at the end of the address space (0xFFFFFFFF), so the problem will not be visible unless you use a 64 bit tool chain for development. On some boards however, changes to the code size (due to different optimizations) we bail out with section overlaps like above. The fix is to add the NOLOAD attribute to the .bss and .sbss sections, telling the linker that .bss does not consume any space in the image. Signed-off-by: Wolfgang Denk

board/[A-Za-i]: Remove lingering references to CFG_CMD_ symbols.

2007-07-10T15:39:10Z

Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted. Signed-off-by: Jon Loeliger

Remove obsolete mpc5xxx linker scripts (2 of 3)

2007-07-03T23:05:44Z

Signed-off-by: Grant Likely

Code cleanup.

2006-11-30T17:02:20Z

- Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the

2006-11-01T00:38:16Z

MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with MPC5XXX_WU_GPIO_DATA_O for affected boards. - Add defintions for some MPC5XXX GPIO pins.

Move "ar" flags to config.mk to allow for silent "make -s"

2006-10-08T23:02:05Z

Based on patch by Mike Frysinger, 20 Jun 2006

Add support for a saving build objects in a separate directory.

2006-09-01T17:49:50Z

Modifications are based on the linux kernel approach and support two use cases: 1) Add O= to the make command line 'make O=/tmp/build all' 2) Set environement variable BUILD_DIR to point to the desired location 'export BUILD_DIR=/tmp/build' 'make' The second approach can also be used with a MAKEALL script 'export BUILD_DIR=/tmp/build' './MAKEALL' Command line 'O=' setting overrides BUILD_DIR environent variable. When none of the above methods is used the local build is performed and the object files are placed in the source directory.

2005-12-12T15:06:05Z

Cleanup for GCC-4.x

2005-10-13T14:45:02Z

Fix problems with ld version 2.16 (dot outside sections problem)

2005-08-31T10:28:00Z

Pointed out by Gerhard Jaeger, 31 Aug 2005; cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html