u-boot.git/board/esd, branch v2010.03

AT91: Update otc570 board to new SoC access

2010-03-07T18:36:37Z

* convert otc570 board to use c stucture SoC access * change gpio access to at91_gpio syntax Signed-off-by: Daniel Gorsulowski

ARM change name of defines for AT91 arm926ejs

2010-03-07T18:36:35Z

Configuration defines should be preceeded with CONFIG_SYS_. Renamed some at91 specific defines to conform to this naming convention: AT91_CPU_NAME to CONFIG_SYS_AT91_CPU_NAME AT91_MAIN_CLOCK to CONFIG_SYS_AT91_MAIN_CLOCK Signed-off-by: Achim Ehrlich

at91: Add esd gmbh OTC570 board support

2010-02-12T18:31:53Z

This patch adds support for esd gmbh OTC570 board. The OTC570 is based on an Atmel AT91SAM9263 SoC. Signed-off-by: Daniel Gorsulowski

ppc4xx: Fix building for PLU405 boards

2010-02-03T08:17:44Z

The init_coupler() function from board/esd/plu405/plu405.c got lost somehow! This patch readds it. Signed-off-by: Matthias Fuchs Signed-off-by: Stefan Roese

at91: Enable slow master clock on meesc board

2010-01-23T14:15:50Z

Normally the processor clock has a divisor of 2. In some cases this this needs to be set to 4. Check the user has set environment mdiv to 4 to change the divisor. Signed-off-by: Daniel Gorsulowski

mpc83xx: vme8349: Fix power up reset sequence for tsi148

2010-01-08T00:36:30Z

Remove PCI reset, if there is a monarch PMC module. Signed-off-by: Reinhard Arlt Signed-off-by: Stefan Roese convert clrbits_be32 + setbits_be32 to clrsetbits_be32, use out_be32 to set gcr. Signed-off-by: Kim Phillips

mpc83xx: Add support for MPC8349 esd caddy2

2010-01-08T00:34:31Z

The caddy2 is a variant of the already supported vme8349. So we just add the differences to this board port. To better support those two boards we switched from fixed SDRAM configuration to usage of spd_sdram(). This is done by providing a board specific SPD EEPROM routine with different values for both boards. Signed-off-by: Reinhard Arlt Signed-off-by: Stefan Roese changed to use mkconfig -t option instead, plus misc codingstyle fixes. Signed-off-by: Kim Phillips

move prototypes for gunzip() and zunzip() to common.h

2009-12-21T20:39:59Z

Prototype for gunzip/zunzip was only in lib_generic/gunzip.c and thus repeated in every file using it. This patch moves the prototypes to common.h and removes all prototypes distributed anywhere else. Signed-off-by: Wolfgang Wegner

5xxx, fdt: move fdt_fixup_memory() to cpu.c file

2009-12-08T21:13:02Z

u-boot updates, before starting Linux, the memory node in the DTS. As this is a "standard" feature, move this functionality to the cpu.c file for mpc5xxx and mpc512x processors. Signed-off-by: Heiko Schocher

POST: Remove duplicated post_hotkey_pressed() functions

2009-12-07T21:44:31Z

This patch introduces a weak default function for post_hotkey_pressed(), returning 0, for boards without hotkey support. The long-running tests won't be started on those boards. This default function was implemented in many board directories. By implementing this weak default we can remove all those duplicate versions. Boards with hotkey support, can override this weak default function by defining one in their board specific code. Signed-off-by: Stefan Roese