u-boot.git/board/exbitgen, branch v1.3.3

Remove all the search paths from the .lds files.

2008-04-18T06:57:32Z

The cross compiler is responsible for providing the correct libraries and the logic to find the linking libraries. Signed-off-by: Jason Wessel

Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections

2008-01-12T19:31:39Z

With recent toolchain versions, some boards would not build because or errors like this one (here for ocotea board when building with ELDK 4.2 beta): ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab] For many boards, the .bss section is big enough that it wraps around at the end of the address space (0xFFFFFFFF), so the problem will not be visible unless you use a 64 bit tool chain for development. On some boards however, changes to the code size (due to different optimizations) we bail out with section overlaps like above. The fix is to add the NOLOAD attribute to the .bss and .sbss sections, telling the linker that .bss does not consume any space in the image. Signed-off-by: Wolfgang Denk

ppc4xx: Rework of 4xx serial driver (2)

2007-10-31T20:20:51Z

Change all linker scripts to reference the changed driver name 4xx_uart.o. Note: In most cased all these explicit referencing of these object files in the linker scripts is not neccessary. Only for manually embedded environment into the U-Boot image, which is not done is most cases. Signed-off-by: Stefan Roese

Move "ar" flags to config.mk to allow for silent "make -s"

2006-10-08T23:02:05Z

Based on patch by Mike Frysinger, 20 Jun 2006

Add support for a saving build objects in a separate directory.

2006-09-01T17:49:50Z

Modifications are based on the linux kernel approach and support two use cases: 1) Add O= to the make command line 'make O=/tmp/build all' 2) Set environement variable BUILD_DIR to point to the desired location 'export BUILD_DIR=/tmp/build' 'make' The second approach can also be used with a MAKEALL script 'export BUILD_DIR=/tmp/build' './MAKEALL' Command line 'O=' setting overrides BUILD_DIR environent variable. When none of the above methods is used the local build is performed and the object files are placed in the source directory.

2005-12-12T15:06:05Z

Fix problems with ld version 2.16 (dot outside sections problem)

2005-08-31T10:28:00Z

Pointed out by Gerhard Jaeger, 31 Aug 2005; cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html

* The PS/2 mux on the BMS2003 board needs 450 ms after power on

2004-01-20T23:12:12Z

before we can access it; add delay in case we are faster (with no CF card inserted) * Cleanup of some init functions * Make sure SCC Ethernet is always stopped by the time we boot Linux to avoid Linux crashes by early packets coming in. * Accelerate flash accesses on LWMON board by using buffered writes

* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)

2003-07-16T21:53:01Z

* Add support for MGT5100 and MPC5200 processors

Fix some missing commands, cleanup header files

2003-06-29T21:03:46Z

(autoscript, bmp, bsp, fat, mmc, nand, portio, ...)