u-boot.git/board/freescale/common, branch v2009.11

fsl: sys_eeprom: Fix 'may be used uninitialized' warning

2009-09-08T14:10:03Z

The warning is bogus, so silence it by initializing the 'ret' variable. Signed-off-by: Anton Vorontsov Acked-by: Timur Tabi Signed-off-by: Kumar Gala

fsl: simplify the "mac id" command, improve boot-time informational message

2009-08-28T22:12:52Z

The "mac id" command took a 4-character parameter as the identifier string. However, for any given board, only one kind of identifier is acceptable, so it makes no sense to ask the user to type it in. Instead, if the user enters "mac id", the identifier (and also the version, if it's NXID) will automatically be set to the correct value. Improve the message that is displayed when EEPROM is read during boot. It now displays "EEPROM:" and then either an error message or the EEPROM identifier if successful. If the identifier in EEPROM is valid, then always reject a bad CRC, even if the CRC field has not been initialized. Don't force the MAC address count to MAX_NUM_PORTS or less. Forcing the value to be changed resulting in an in-memory copy that does not match what's in hardware, even though the user did not request that change. Finally, always update the CRC value in the in-memory copy after any field is changed, so that the CRC is always correct. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala

85xx/86xx: Replace in8/out8 with in_8/out_8 on FSL boards

2009-07-22T15:16:55Z

The pixis code used in8/out8 all over the place. Replace it with in_8/out_8 macros. Signed-off-by: Kumar Gala

fsl: Fix compiler warnings from gcc-4.4 in sys_eeprom code

2009-07-03T17:46:47Z

sys_eeprom.c: In function 'do_mac': sys_eeprom.c:323: warning: dereferencing type-punned pointer will break strict-aliasing rules sys_eeprom.c: In function 'mac_read_from_eeprom': sys_eeprom.c:395: warning: dereferencing type-punned pointer will break strict-aliasing rules Signed-off-by: Kumar Gala

fsl: Update the number of ethxaddr in reading system eeprom

2009-06-12T22:17:01Z

We support up to 8 mac addresses in system eeprom, so we define the macro MAX_NUM_PORTS to limit the mac_count to 8, and update the number of ethxaddr according to mac_count. Signed-off-by: Haiying Wang Signed-off-by: Kumar Gala

General help message cleanup

2009-06-12T18:47:16Z

Many of the help messages were not really helpful; for example, many commands that take no arguments would not print a correct synopsis line, but "No additional help available." which is not exactly wrong, but not helpful either. Commit ``Make "usage" messages more helpful.'' changed this partially. But it also became clear that lots of "Usage" and "Help" messages (fields "usage" and "help" in struct cmd_tbl_s respective) were actually redundant. This patch cleans this up - for example: Before: => help dtt dtt - Digital Thermometer and Thermostat Usage: dtt - Read temperature from digital thermometer and thermostat. After: => help dtt dtt - Read temperature from Digital Thermometer and Thermostat Usage: dtt Signed-off-by: Wolfgang Denk

fsl: Remove unnecessary debug printfs

2009-03-09T22:46:10Z

These were left in accidentally, and are not really useful unless the code is as broken as it was when it was being developed. Signed-off-by: Andy Fleming

Fixup SGMII PHY ids in the device tree

2009-02-17T00:05:54Z

The device tree's PHY addresses need to be fixed up if we're using the SGMII Riser Card. The 8572, 8536, and 8544 DS boards were modified to call this function. Code idea taken from Liu Yu Signed-off-by: Andy Fleming

Command usage cleanup

2009-01-28T07:49:52Z

Remove command name from all command "usage" fields and update common/command.c to display "name - usage" instead of just "usage". Also remove newlines from command usage fields. Signed-off-by: Peter Tyser

Standardize command usage messages with cmd_usage()

2009-01-28T07:43:45Z

Signed-off-by: Peter Tyser