u-boot.git/board/freescale/common, branch v2016.09

SECURE_BOOT: Enable chain of trust in SPL framework

2016-07-26T16:01:35Z

Override jump_to_image_no_args function to include validation of u-boot image using spl_validate_uboot before jumping to u-boot image. Also define macros in SPL framework to enable crypto operations. Reviewed-by: Aneesh Bansal Signed-off-by: Sumit Garg Reviewed-by: Simon Glass Reviewed-by: York Sun

powerpc/mpc85xx: SECURE BOOT- Enable chain of trust in SPL

2016-07-21T18:09:23Z

As part of Chain of Trust for Secure boot, the SPL U-Boot will validate the next level U-boot image. Add a new function spl_validate_uboot to perform the validation. Enable hardware crypto operations in SPL using SEC block. In case of Secure Boot, PAMU is not bypassed. For allowing SEC block access to CPC configured as SRAM, configure PAMU. Reviewed-by: Ruchika Gupta Signed-off-by: Aneesh Bansal Signed-off-by: Sumit Garg Reviewed-by: Simon Glass Reviewed-by: York Sun

board: freescale: common: Add flag for LBMAP brdcfg reg offset

2016-06-03T21:12:51Z

Add QIXIS_LBMAP_BRDCFG_REG to the save offset of LBMAP configuration register instead of hardcoding it in set_lbmap() function. Signed-off-by: Calvin Johnson Signed-off-by: Abhimanyu Saini Signed-off-by: Prabhakar Kushwaha Reviewed-by: York Sun

board: freescale: common: Conditionally compile IFC QXIS func

2016-06-03T21:12:50Z

Check if qixis supports memory-mapped read/write before compiling IFC based qixis read/write functions. Signed-off-by: Calvin Johnson Signed-off-by: Abhimanyu Saini Signed-off-by: Prabhakar Kushwaha Reviewed-by: York Sun

board: ls102xa: Fix ICID setup

2016-06-03T21:12:06Z

LS102A ref manual dictates that ICID have to be written to the MSB of the ICID register, not to the LSB. Signed-off-by: Vincent Siles

arm: uniform usage of u32 in ls102x caam config

2016-05-18T15:51:44Z

Mix usage of uint32_t and u32 fixed in favor of u32. Signed-off-by: Vincent Siles Reviewed-by: York Sun

arm: Fix SCFG ICID reg addresses

2016-05-18T15:51:44Z

On the LS102x boards, in order to initialize the ICID values of masters, the dev_stream_id array holds absolute offsets from the base of SCFG. In ls102xa_config_ssmu_stream_id, the base pointer is cast to uint32_t * before adding the offset, leading to an invalid address. Casting it to void * solves the issue. Signed-off-by: Vincent Siles Reviewed-by: York Sun

Fix various typos, scattered over the code.

2016-05-06T01:39:26Z

Spelling corrections for (among other things): * environment * override * variable * ftd (should be "fdt", for flattened device tree) * embedded * FTDI * emulation * controller

armv8/ls2080ardb: Enable VID support

2016-03-29T15:46:24Z

This patch enable VID support for ls2080ardb platform. It uses the common VID driver. Signed-off-by: Rai Harninder Reviewed-by: York Sun

SECURE BOOT: Change fsl_secboot_validate func to pass image addr

2016-03-29T15:46:23Z

Use a pointer to pass image address to fsl_secboot_validate(), instead of using environmental variable "img_addr". Signed-off-by: Aneesh Bansal Signed-off-by: Saksham Jain Reviewed-by: York Sun