u-boot.git/board/freescale/mx28evk, branch v2012.07Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/board/freescale/mx28evk?h=v2012.072012-07-11T08:54:53Zmx28evk: Add I2C support2012-07-11T08:54:53ZFabio Estevamfabio.estevam@freescale.com2012-05-07T05:42:34Zurn:sha1:175a7d2778ad26a244f5c846a6385413c87d95a7
Add I2C support.
Tested by placing a 24LC16 EEPROM into the U50 slot which comes empty from factory.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
mx28evk: Fix boot by adjusting HW_DRAM_CTL29 register2012-07-07T12:07:29ZFabio Estevamfabio.estevam@freescale.com2012-06-19T07:24:56Zurn:sha1:f69b0653acf5482a94fa1ec9542165914e30e50c
commit acc4959fc1 (Revert "i.MX28: Enable additional DRAM address bits")
broke mx28evk boot.
Fix it by properly adjusting the HW_DRAM_CTL29 register value.
Suggested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
mx28evk: add NAND support2012-05-15T06:31:33ZLauri Hintsalalauri.hintsala@bluegiga.com2012-04-17T00:35:46Zurn:sha1:ecb7be2985e130d1d3f7569f086cf50bfe60d337
NAND support is not enabled by default because Eval Kit is not delivered
with NAND chip. To enable NAND support add CONFIG_CMD_NAND to board config.
Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Acked-by: Marek Vasut <marex@denx.de>
mx28evk: add SPI support2012-02-27T20:19:22ZMatthias Fuchsmatthias.fuchs@esd.eu2012-01-18T01:33:09Zurn:sha1:ed97abed27455b4f9e0dec6274976f5010258ed9
This patch adds SPI support for the MX28EVK. Support for
an optionally installed SPI flash is also added. An example
configuration for redundant envrionment from SPI flash is also
added but disabled by default.
This patch has been tested on a MX28EVK Rev. D with an installed
SST25VF032B 32Mbit SPI flash.
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
mx28evk: add USB support2012-02-27T20:19:22ZMatthias Fuchsmatthias.fuchs@esd.eu2012-01-18T01:33:08Zurn:sha1:598aa2bbfb5aeab43fbfb5ca63218daa9c425871
This patch enables USB host support on the MX28EVK board.
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
mx28evk: Remove 'all' target from Makefile2012-01-16T07:40:09ZFabio Estevamfestevam@gmail.com2011-12-29T03:34:12Zurn:sha1:d109ed946c29a29e840654afa0832567408dde51
Remove 'all' target from Makefile, as this is unused code.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
mx28evk: Add initial support for MX28EVK board2012-01-16T07:40:09ZFabio Estevamfestevam@gmail.com2011-12-20T05:46:34Zurn:sha1:29f75a5ce5800cf39d29e7669b27e6deb4038f28
Add initial support for Freescale MX28EVK board.
Tested boot via SD card and by loading a kernel via TFTP through
the FEC interface.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>