u-boot.git/board/freescale/mx28evk, branch v2012.10Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/board/freescale/mx28evk?h=v2012.102012-09-24T08:45:41Zmx28evk: Remove fecmxc_mii_postcall()2012-09-24T08:45:41ZFabio Estevamfabio.estevam@freescale.com2012-09-21T10:00:53Zurn:sha1:5436eaeab9155633fd858e0a6b876d1077348d94
fecmxc_mii_postcall() is specific to the KSZ9021 PHY on m28evk and
should not be used on mx28evk, which has LAN8270 instead.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
mx28evk: Convert to mxs_adjust_memory_params()2012-09-04T09:57:56ZFabio Estevamfabio.estevam@freescale.com2012-08-28T09:29:06Zurn:sha1:ddfcc810d3947a085fb85cefcb6cb04c723eadf9
Recent conversion from mx28_adjust_memory_params to mxs_adjust_memory_params
missed to update mx28evk, which caused the board not to boot.
Apply the conversion so that the board can boot again.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
MX28: mx28evk: Align SSP clock speed2012-09-04T09:57:56ZOtavio Salvadorotavio@ossystems.com.br2012-08-27T23:56:40Zurn:sha1:4f434e3d6dd33162f44a19da64d0853b8147539d
Align the SSP clock speed with oscilator to achieve higher transfer
stability.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Marek Vasut <marex@denx.de>
mxs: Rename 'mx28_dram_init' to 'mxs_dram_init'2012-09-01T12:58:28ZOtavio Salvadorotavio@ossystems.com.br2012-08-19T04:58:30Zurn:sha1:72f8ebf17e166da67881b18b946fc976d3039aa4
The DRAM initialization, after SPL has complete, is exactly the same
for all mxs SoCs so we should name it accordinly.
The following boards has been changed:
* apx4devkit
* m28evk
* mx28evk
* sc_sps_1
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
MX28: Move the u-boot.bd info CPUDIR/SOCDIR2012-09-01T12:58:18ZMarek Vasutmarex@denx.de2012-08-05T00:36:16Zurn:sha1:7fb1ed0eabd6aeb36dd107ea1ed1f7432064031e
This gets us rid of duplication of the same file.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
mxs: Reowork SPL to use 'mxs' prefix for methods2012-09-01T12:58:17ZOtavio Salvadorotavio@ossystems.com.br2012-08-05T09:05:32Zurn:sha1:1e0cf5c34bd3074d6b026035354a89121fbf224f
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
mxs: prefix register structs with 'mxs' prefix2012-09-01T12:58:17ZOtavio Salvadorotavio@ossystems.com.br2012-08-05T09:05:31Zurn:sha1:9c471142bc6c5aa01532ba85ead8509bbf2eb153
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
mx28evk: Add I2C support2012-07-11T08:54:53ZFabio Estevamfabio.estevam@freescale.com2012-05-07T05:42:34Zurn:sha1:175a7d2778ad26a244f5c846a6385413c87d95a7
Add I2C support.
Tested by placing a 24LC16 EEPROM into the U50 slot which comes empty from factory.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
mx28evk: Fix boot by adjusting HW_DRAM_CTL29 register2012-07-07T12:07:29ZFabio Estevamfabio.estevam@freescale.com2012-06-19T07:24:56Zurn:sha1:f69b0653acf5482a94fa1ec9542165914e30e50c
commit acc4959fc1 (Revert "i.MX28: Enable additional DRAM address bits")
broke mx28evk boot.
Fix it by properly adjusting the HW_DRAM_CTL29 register value.
Suggested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
mx28evk: add NAND support2012-05-15T06:31:33ZLauri Hintsalalauri.hintsala@bluegiga.com2012-04-17T00:35:46Zurn:sha1:ecb7be2985e130d1d3f7569f086cf50bfe60d337
NAND support is not enabled by default because Eval Kit is not delivered
with NAND chip. To enable NAND support add CONFIG_CMD_NAND to board config.
Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Acked-by: Marek Vasut <marex@denx.de>