u-boot.git/board/freescale/mx53evk, branch v2012.10

fsl_esdhc: Remove cache snooping for i.MX

2012-09-01T12:58:30Z

The cache snooping feature of Freescale's eSDHC IP is not available on i.MX, so disable it globally for this architecture. This avoids setting no_snoop for all i.MX boards, and it prevents setting a reserved bit of a reserved register if fsl_esdhc_mmc_init() is used on i.MX, like in arch/arm/cpu/armv7/imx-common/cpu.c/cpu_mmc_init(). Since no_snoop was only used on i.MX, get rid of it BTW. Signed-off-by: Benoît Thébaudeau Cc: Andy Fleming Cc: Stefano Babic Cc: Kim Phillips

mx5:Use IMX_GPIO_NR macro

2012-09-01T12:58:30Z

Signed-off-by: Ashok Kumar Reddy

mx53evk: add boot_mode support

2012-09-01T12:58:26Z

This allows a watchdog reset to start the ROM's usb/serial downloader, or boot from an sdcard. Signed-off-by: Troy Kisky

mx53evk: Remove unused SOBJS

2012-07-07T12:07:26Z

There is no .S file in this directory, so just remove SOBJS. Cc: Jason Liu Signed-off-by: Fabio Estevam

MX53: DDR: Fix ZQHWCTRL field TZQ_CS

2012-04-16T12:53:58Z

Currently, board files are setting this field to 0x01 which the manual says is a reserved value. Change to use the default of 0x02 - 128 cycles. Signed-off-by: Troy Kisky Acked-by: Fabio Estevam

mx53evk: Use gpio_direction_input prior to gpio_get_value

2012-02-27T20:19:24Z

Use gpio_direction_input prior to gpio_get_value. Cc: Jason Liu Signed-off-by: Fabio Estevam Acked-by: Jason Liu

mmc: Change board_mmc_getcd() function prototype.

2012-01-09T03:28:27Z

The new API no longer uses the extra cd parameter that was used to store the card presence state. Instead, this information is returned via the function's return value. board_mmc_getcd() returns -1 to indicate that no card-detection mechanism is implemented; 0 indicates that no card is present and 1 is returned if it was detected that a card is present. The rationale for this change can be found in the following email thread: http://lists.denx.de/pipermail/u-boot/2011-November/110180.html In summary, the old API was not consistent with the rest of the MMC API which always passes a struct mmc as the first parameter. Furthermore the cd parameter was used to mean "card absence" in some implementations and "card presence" in others. Signed-off-by: Thierry Reding Tested-by: Jason Liu

mx53evk: Configure the pins as GPIOs prior to using gpio_get_value

2011-12-06T22:59:39Z

Configure the pins as GPIO prior to using gpio_get_value. Cc: Jason Liu Signed-off-by: Fabio Estevam Acked-by: Jason Liu

mx53evk: Remove unused get_board_rev function

2011-11-04T21:06:37Z

No board information is passed for MX53EVK, so remove get_board_rev function. Cc: Jason Liu Signed-off-by: Fabio Estevam Acked-by: Jason Liu

MX5: mx53evk: use new pmic driver

2011-10-27T19:56:32Z

Switch to new pmic generic driver. Signed-off-by: Stefano Babic CC: Jason Liu Acked-by: Jason Liu