Unnamed repository; edit this file 'description' to name the repository. http://cgit.235523.xyz/u-boot.git/atom/board/freescale/mx6memcal/README?h=master 2026-01-28T06:26:50Z 2026-01-28T06:26:50Z Alice Guo alice.guo@nxp.com 2026-01-23T07:54:06Z urn:sha1:add12cb688d5a05858beb82a9a3c272767468262 This patch renames the board directory from board/freescale to board/nxp because NXP now provides Board Support Packages (BSPs) and tools for the former Freescale i.MX and other i.MX products. All relevant references have been updated accordingly. This change does not affect functionality. Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> 2018-01-03T12:58:51Z Eric Nelson eric@nelint.com 2017-12-11T15:52:11Z urn:sha1:baefb63a13d106458577704ca4586b3f414c9520 This is a virtual "board" that uses configuration files and Kconfig to define the memory layout used by a real board during the board bring-up process. It generates an SPL image that can be loaded using imx_usb or SB_LOADER.exe. When run, it will generate a set of calibration constants for use in either or both a DCD configuration file for boards that use u-boot.imx or struct mx6_mmdc_calibration for boards that boot via SPL. In essence, it is a configurable, open-source variant of the Freescale ddr-stress tool. https://community.nxp.com/docs/DOC-105652 File mx6memcal_defconfig configures the board for use with mx6sabresd or mx6qsabreauto. Signed-off-by: Eric Nelson <eric@nelint.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>