u-boot.git/board/freescale/mx6slevk, branch v2016.01

MAINTAINERS/mailmap: Update my email address

2016-01-11T16:22:43Z

Update my email address to the NXP account. Signed-off-by: Fabio Estevam

mx6slevk: Remove empty reset_cpu()

2015-11-12T16:26:31Z

There is really no need to provide an empty reset_cpu() implementation, so just remove it. Signed-off-by: Fabio Estevam

imx: boards: Add maintainers info

2015-09-24T09:28:59Z

Add MAINTAINERS info for mx6slevk_spl, mx6ul_9x9_evk and mx6qpsabreauto. Signed-off-by: Peng Fan Cc: Stefano Babic

mx6: remove SYS_SOC from board Kconfig

2015-09-13T08:37:29Z

Remove duplicated SYS_SOC Kconfig entry from board Kconfig, because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig. Signed-off-by: Peng Fan Cc: Stefano Babic Cc: Heiko Schocher Cc: Christian Gmeiner Cc: Stefan Roese Cc: Troy Kisky Cc: Nikita Kiryanov Cc: "Eric Bénard" Cc: Fabio Estevam Cc: Tim Harvey Cc: Marek Vasut Cc: Markus Niebel Cc: Otavio Salvador Acked-by: Stefan Roese Acked-by: Marek Vasut Acked-by: Christian Gmeiner Acked-by: Markus Niebel Acked-by: Troy Kisky Acked-by: Igor Grinberg

imx: mx6slevk: add SPL support

2015-09-02T13:34:13Z

Add SPL boot support for mx6slevk board. 1. Introduce a configuration file mx6slevk_spl_defconfig. 2. i.MX6SL has same DRAM space with i.MX6SX, need to change SPL DRAM SPACE. 3. Include imx6_spl.h and related SPL macro in mx6slevk.h. 4. select SUPPORT_SPL for TARGET_MX6SLEVK. 5. Add SPL board code to do related initialization. Boot Log: U-Boot SPL 2015.07-00544-g1594a76 (Aug 17 2015 - 01:56:59) reading u-boot.img reading u-boot.img U-Boot 2015.07-00544-g1594a76 (Aug 17 2015 - 01:56:59 +0000) CPU: Freescale i.MX6SL rev1.2 996 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 50C Reset cause: POR Board: MX6SLEVK I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan Cc: Stefano Babic Cc: Fabio Estevam

imx: clock support enet2 anatop clock support

2015-09-02T13:29:14Z

To i.MX6SX/UL, two ethernet interfaces are supported. Add ENET2 clock support: 1. Introduce a new input parameter "fec_id", only 0 and 1 are allowed. To value 1, only i.MX6SX/UL can pass the check. 2. Modify board code who use this api to follow new api prototype. Signed-off-by: Peng Fan Cc: Heiko Schocher Cc: Fabio Estevam Cc: Stefan Roese Cc: Nikolaos Pasaloukos Cc: Stefano Babic Reviewed-by: Stefan Roese

mx6slevk: Provide a proper pad configuration for OTG1_ID pin

2015-03-02T10:55:26Z

Pass the same pad configuration as done in the kernel so that OTG1_ID pin can properly work in device mode. Signed-off-by: Fabio Estevam

imx:mx6slevk implement power init board

2015-02-23T08:11:41Z

Implement power_init_board and related I2C interface configuration. After adding this, uboot can successfully detect and configure pmic. " U-Boot 2015.01-00281-ge29eddf (Feb 12 2015 - 09:24:01) CPU: Freescale i.MX6SL rev1.0 at 396 MHz Reset cause: POR Board: MX6SLEVK I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 " Signed-off-by: Peng Fan

Merge branch 'master' of git://git.denx.de/u-boot-spi

2015-01-02T12:42:58Z

imx:mx6slevk add spi nor boot support

2014-12-31T09:24:01Z

Add spi nor boot support for mx6slevk board. Signed-off-by: Peng Fan Reviewed-by: Jagannadha Sutradharudu Teki