u-boot.git/board/freescale, branch v2009.03Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/board/freescale?h=v2009.032009-03-17T21:58:37ZColdFire: Fix M5329EVB and M5373EVB nand issue2009-03-17T21:58:37ZTsiChung LiewTsi-Chung.Liew@freescale.com2009-03-02T19:16:45Zurn:sha1:9017d9325a5067b2ab0d70a2d3c907620c9ab7f8
The Nand flash was unable to read and write properly
due to Nand Chip Select (nCE) setup was in reverse
order. Also, increase the Nand time out value to 60.
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
fsl: Remove unnecessary debug printfs2009-03-09T22:46:10ZAndy Flemingafleming@freescale.com2009-03-07T01:05:52Zurn:sha1:48c2b7bb432da84fcce05b4db6efad0be73a93dc
These were left in accidentally, and are not really useful unless the
code is as broken as it was when it was being developed.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx2009-03-08T23:41:48ZWolfgang Denkwd@denx.de2009-03-08T23:41:48Zurn:sha1:014c595f12d4f7e14cb10188f856465b2d41718f
Conflicts:
lib_ppc/board.c
Signed-off-by: Wolfgang Denk <wd@denx.de>
mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal2009-03-06T00:13:11ZAnton Vorontsovavorontsov@ru.mvista.com2009-02-19T15:20:39Zurn:sha1:7e2ec1de1d2d723b59d7dd2fb85ff71b952d63af
The SerDes initialization should be finished before negating the reset
signal according to the reference manual. This isn't an issue on real
hardware, but we'd better stick to the specifications anyway.
Suggested-by: Liu Dave <DaveLiu@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx2009-02-24T21:52:16ZWolfgang Denkwd@denx.de2009-02-24T21:52:16Zurn:sha1:89e372cd3d520ed20fab543f2cbba2dbb9490cf8mpc83xx: MPC837XERDB: Add PCIe support2009-02-23T21:52:35ZAnton Vorontsovavorontsov@ru.mvista.com2009-02-19T15:20:52Zurn:sha1:7e91558032a0c1932dd7f4f562f9c7cc55efc496
On MPC8377E-RDB and MPC8378E-RDB boards we have PCIe and mini-PCIe
slots. Let's support them.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
mpc8641hpcn: Indicate 36-bit addr map in boot messages2009-02-23T21:48:17ZBecky Brucebeckyb@kernel.crashing.org2009-02-12T16:43:32Zurn:sha1:2331e18b9df0ab98ebf3ab44c0efea1311949aaa
If 36-bit addressing is enabled, print a message on the console
when we boot.
Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
83xx: Add eSDHC support on 8379 EMDS board2009-02-17T00:07:43ZAndy Flemingafleming@freescale.com2008-10-30T21:50:14Zurn:sha1:e1ac387f4645499746856adc1aeaa9787da2eca6
Signed-off-by: Andy Fleming <afleming@freescale.com>
85xx: Add eSDHC support for 8536 DS2009-02-17T00:07:43ZAndy Flemingafleming@freescale.com2008-10-30T21:51:33Zurn:sha1:80522dc8369a89938369fbcee572e662373bc9a3
Signed-off-by: Andy Fleming <afleming@freescale.com>
86xx: Reset update2009-02-17T00:05:56ZPeter Tyserptyser@xes-inc.com2009-02-05T17:25:25Zurn:sha1:4ef630df773e45806d701bf5d25c328778bb4cde
Update the 86xx reset sequence to try executing a board-specific reset
function. If the board-specific reset is not implemented or does not
succeed, then assert #HRESET_REQ. Using #HRESET_REQ is a more standard
reset procedure than the previous method and allows all board
peripherals to be reset if needed.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>