u-boot.git/board/freescale, branch v2011.06

powerpc/p1022ds: set the clock-frequency prop only if the clock is enabled

2011-06-09T20:53:38Z

The clock-frequency property in an audio codec's device tree node is set to the input clock frequency for that codec. On the Freescale P1022DS board, the input clock is enabled only if the hwconfig 'audclk' option is set. Therefore, the property should only be set in the device tree if the clock is actually enabled. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala

mx31ads: Use the new relocation scheme

2011-06-06T07:35:25Z

This fixes the MX31ADS build by using the new relocation scheme. Signed-off-by: Fabio Estevam Tested-by: Felix Radensky

mx5: board: code clean up for checkboard code

2011-05-23T06:36:46Z

The boot cause code has been factor out to soc common code,we need drop the part from the board support code This patch also remove the redundant cpu version print Signed-off-by: Jason Liu

MX53: Add initial support for MX53SMD board.

2011-05-23T06:36:46Z

Signed-off-by: Fabio Estevam

MX53: support for freescale MX53LOCO board

2011-05-23T06:36:46Z

This patch add initial support for freescale MX53LOCO board. Network(FEC),SD/MMC,UART have been supported by this patch Signed-off-by: Jason Liu

Minor coding style cleanup.

2011-05-19T20:22:44Z

Signed-off-by: Wolfgang Denk

powerpc/85xx: add support for env in MMC/SPI on corenet ds boards

2011-05-18T14:15:25Z

Signed-off-by: Shaohui Xie Signed-off-by: Kumar Gala

MX31: mx31pdk: Add watchdog support

2011-05-11T21:03:15Z

Signed-off-by: Fabio Estevam

Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

2011-04-30T20:45:55Z

Handle most LDSCRIPT setting centrally

2011-04-29T22:59:47Z

Currently, some linker scripts are found by common code in config.mk. Some are found using CONFIG_SYS_LDSCRIPT, but the code for that is sometimes in arch config.mk and sometimes in board config.mk. Some are found using an arch-specific rule for looking in CPUDIR, etc. Further, the powerpc config.mk rule relied on CONFIG_NAND_SPL when it really wanted CONFIG_NAND_U_BOOT -- which covered up the fact that not all NAND_U_BOOT builds actually wanted CPUDIR/u-boot-nand.lds. Replace all of this -- except for a handful of boards that are actually selecting a linker script in a unique way -- with centralized ldscript finding. If board code specifies LDSCRIPT, that will be used. Otherwise, if CONFIG_SYS_LDSCRIPT is specified, that will be used. If neither of these are specified, then the central config.mk will check for the existence of the following, in order: $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT) $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds (only if CONFIG_NAND_U_BOOT) $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds $(TOPDIR)/$(CPUDIR)/u-boot.lds Some boards (sc3, cm5200, munices) provided their own u-boot.lds that were dead code, because they were overridden by a CPUDIR u-boot.lds under the old powerpc rules. These boards' own u-boot.lds have bitrotted and no longer work -- these lds files have been removed. Signed-off-by: Scott Wood Tested-by: Graeme Russ