u-boot.git/board/friendlyelec, branch next

rockchip: rk3588-nanopc-t6-lts: Add missing board -u-boot.dtsi

2025-01-11T00:56:22+00:00

The commit 7cec3e701940 ("rockchip: rk3588-nanopc-t6: Add support for
NanoPC-T6 LTS") added support for the LTS variant of NanoPC T6. However,
a board specific -u-boot.dtsi file was never added.

Due to the missing -u-boot.dtsi file the LTS fdt included in the FIT is
never tagged with bootph props.

When ENV_IS_IN_SPI_FLASH is enabled, not enabled in defconfig, the env
can successfully load from SPI flash on the non-LTS variant, something
that does not work on the LTS variant due to missing bootph-some-ram
props in the LTS fdt.

Fix this by adding a LTS -u-boot.dtsi file that just include the non-LTS
-u-boot.dtsi file.

Reported-by: Ricardo Pardini 
Fixes: 7cec3e701940 ("rockchip: rk3588-nanopc-t6: Add support for NanoPC-T6 LTS")
Signed-off-by: Jonas Karlman 
Reviewed-by: Kever Yang

rockchip: rk3588-nanopc-t6: Add support for NanoPC-T6 LTS

2024-10-26T02:46:48+00:00

Update defconfig to enable features included in pending upstream DT and
implement board_fit_config_name_match() to load correct DT for LTS and
non-LTS version of the NanoPC-T6.

Signed-off-by: Jonas Karlman 
Reviewed-by: Kever Yang

board: rockchip: Add FriendlyElec CM3588 NAS

2024-08-09T10:35:24+00:00

The CM3588 NAS by FriendlyElec pairs the CM3588 compute module, based
on the Rockchip RK3588 SoC, with the CM3588 NAS Kit carrier board.

Features tested on a CM3588 NAS Kit with 8GB RAM 64GB eMMC module:
- SD-card boot
- eMMC boot
- Ethernet
- PCIe/NVMe
- USB gadget
- USB host

Signed-off-by: Jonas Karlman 
Reviewed-by: Kever Yang

board: rockchip: Add FriendlyElec NanoPi R6S

2024-07-17T06:48:18+00:00

The NanoPi R6S is a SBC by FriendlyElec based on the Rockchip RK3588s.
It comes with 4GB or 8GB of RAM, a microSD card slot, 32GB eMMC storage,
one RTL8211F 1GbE and two RTL8125 2.5GbE Ethernet ports, one USB 2.0
Type-A and one USB 3.0 Type-A port, a HDMI port, a 12-pin GPIO FPC
connector, a fan connector, IR receiver as well as some buttons and LEDs.

Add initial support for this board using the upstream devicetree sources.

Kernel commit:
f1b11f43b3e9 ("arm64: dts: rockchip: Add support for NanoPi R6S")

Reviewed-by: Kever Yang 
Signed-off-by: Sebastian Kropatsch

board: rockchip: Add FriendlyElec NanoPi R6C

2024-07-17T06:48:18+00:00

The NanoPi R6C is a SBC by FriendlyElec based on the Rockchip RK3588s.
It comes with 4GB or 8GB of RAM, a microSD card slot, optional 32GB eMMC
storage, one M.2 M-Key connector, one RTL8211F 1GbE and one RTL8125
2.5GbE Ethernet port, one USB 2.0 Type-A and one USB 3.0 Type-A port, a
HDMI port, a 30-pin GPIO header as well as multiple buttons and LEDs.

Add initial support for this board using the upstream devicetree sources.

Tested in U-Boot proper:
- Booting from eMMC works
- 1GbE Ethernet works using the eth_eqos driver (tested by ping)
- 2.5GbE Ethernet works using the eth_rtl8169 driver (tested by ping),
  but the status LEDs on this specific port currently aren't working
- NVMe SSD in M.2 socket does get recognized (tested with `nvme scan`
  followed by `nvme details`)

Kernel commit:
d5f1d7437451 ("arm64: dts: rockchip: Add support for NanoPi R6C")

Reviewed-by: Quentin Schulz 
Reviewed-by: Kever Yang 
Signed-off-by: Sebastian Kropatsch

rockchip: nanopc-t6-rk3588: use DRAM banks from ATAGS

2024-04-26T07:47:05+00:00

RK3588-based devices now support creating DRAM banks with proper holes
by reading the ATAGS from Rockchip TPL blob, so let's use that mechanism
instead.

Since ft_board_setup isn't defined anymore, there's no need for
selecting CONFIG_OF_BOARD_SETUP.

Similarly, because the nanopc-t6-rk3588.c would be empty, it is simply
removed, with the (would-be-empty) Makefile as well.

The CONFIG_NR_DRAM_BANK now defaults to 10 which is a safe bet for
reading banks from ATAGS, so let's use the default value instead.

Co-developed-by: Chris Morgan 
Signed-off-by: Chris Morgan 
Signed-off-by: Quentin Schulz 
Reviewed-by: Kever Yang

boards: Remove empty BOARD_SPECIFIC_OPTIONS

2024-03-13T16:40:43+00:00

While there are currently uses for a stanza of "config BOARD_SPECIFIC_OPTIONS"
followed by "def_bool y" and a series of select/imply statements, having
this option set followed by nothing else doesn't provide anything.
Remove these stanzas.

Signed-off-by: Tom Rini

board: rockchip: add FriendlyElec NanoPC-T6 rk3588 board

2023-10-23T10:21:55+00:00

The NanoPC-T6 is a Rockchip RK3588 based SBC by FriendlyElec.

There are four variants depending on the DRAM size: 4G/32GB eMMC,
8G/64GB eMMC, 16G/16MB SPI NOR, and 16G/256GB eMMC/16MB SPI NOR

Specifications:
    CPU: Rockchip RK3588, 4x Cortex-A76 (up to 2.4GHz)
                        + 4x Cortex-A55 (up to 1.8GHz)
    GPU: Mali-G610 MP4
    VPU: 8K@60fps H.265 and VP9 decoder, 8K@30fps H.264 decoder,
         4K@60fps AV1 decoder, 8K@30fps H.264 and H.265 encoder
    NPU: 6TOPs, supports INT4/INT8/INT16/FP16
    RAM: 64-bit 4GB/8GB/16GB LPDDR4X at 2133MHz
    eMMC: 0GB/32GB/64GB/256GB HS400
    MicroSD Slot: MicroSD SDR104
    PCIe 3.0: M.2 M-Key x1, PCIe 3.0 x4 for NVMe SSDs up to 2,500 MB/s
    Ethernet: PCIe 2.5G 2x Ethernet (RTL8125BG)
    PCIe 2.1: M.2 E-Key x1, PCIe 2.1 x1 and USB2.0 Host,
              supports M.2 WiFi and Bluetooth
    4G Module: MiniPCIe x1, MicroSIM Card Slot x1
    Audio Out: 3.5mm jack for stereo headphone output
    Audio In: 2.0mm PH-2A connector for analog microphone input
    Video Input: standard HDMI input port, up to 4Kp60
    2x 4-lane MIPI-CSI, compatible with MIPI V1.2
    Video Output: 2x standard HDMI output ports compatible with HDMI2.1,
                  HDMI2.0, and HDMI1.4
    2x 4-lane MIPI-DSI, compatible with MIPI DPHY 2.0 or CPHY 1.1
    USB-A: USB 3.0, Type A
    USB-C: Full function USB Type‑C port, DP display up to 4Kp60, USB 3.0
    40-pin 2.54mm header connector: up to 2x SPIs, 6x UARTs, 1x I2Cs,
                                    8x PWMs, 2x I2Ss, 28x GPIOs
    Debug UART: 3 Pin 2.54mm header, 3V level, 1500000bps
    Onboard IR receiver: 38KHz carrier frequency
    RTC Battery: 2 Pin 1.27/1.25mm RTC battery connector for low power
                 RTC IC HYM8563TS
    5V Fan connector
    Working Temperature: 0C to 70C
    Power: 5.5*2.1mm DC Jack, 12VDC input
    Dimensions: 110x80x1.6mm (without case) / 86x114.5x30mm (with case)

Kernel commits:
893c17716d0c ("arm64: dts: rockchip: Add NanoPC T6")
a721e28dfad2 ("arm64: dts: rockchip: Add NanoPC T6 PCIe Ethernet support")
ac76b786cc37 ("arm64: dts: rockchip: Add NanoPC T6 PCIe e-key support")

Signed-off-by: John Clark 
Reviewed-by: Kever Yang