u-boot.git/board/gardena, branch master

Merge patch series "Tidy up use of 'SPL' and CONFIG_SPL_BUILD"

2024-10-11T18:23:25+00:00

Simon Glass  says:

When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL

Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.

For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:

   #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)

In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.

This series starts a change in terminology and usage to resolve the
above issues:

- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
  'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
  defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_

It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.

This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.

The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.

board: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILD

2024-10-11T17:44:48+00:00

Use the new symbol to refer to any 'SPL' build, including TPL and VPL

Signed-off-by: Simon Glass

Merge patch series "Miscellaneous fixes"

2024-09-24T19:41:21+00:00

Jerome Forissier  says:

Miscellaneous fixes made when developing the lwIP series [1]. They are
posted separately since they make sense on their own. Subsequent
versions of the lwIP series will contain a squashed version of this one.

[1] http://patchwork.ozlabs.org/project/uboot/list/?series=420712&state=%2A&archive=both

at91: rename mem_init() to at91_mem_init()

2024-09-24T19:41:21+00:00

The AT91-based platforms have a mem_init() function declared in
arch/arm/mach-at91/include/mach/at91_common.h and implemented in various
places. In preparation of the introduction of the lwIP networking library
which also has a global mem_init() function, rename the AT91 one to
at91_mem_init().

Signed-off-by: Jerome Forissier 
Reviewed-by: Peter Robinson 
Reviewed-by: Ilias Apalodimas 
Reviewed-by: Heiko Schocher 
Reviewed-by: Hari Prasath Gujulan Elango

include: export uuid.h

2024-09-12T15:35:37+00:00

Move this header to include/u-boot/ so that it can be used by external
tools.

Reviewed-by: Ilias Apalodimas 
Signed-off-by: Caleb Connolly

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03+00:00

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36+00:00

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

board: gardena: Remove and add needed includes

2024-05-07T14:00:24+00:00

Remove  from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini

global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*

2022-12-05T21:06:07+00:00

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini 
Reviewed-by: Simon Glass

global: Move remaining CONFIG_SYS_NAND_* to CFG_SYS_NAND_*

2022-12-05T21:05:38+00:00

The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NAND
namespace do not easily transition to Kconfig. In many cases they likely
should come from the device tree instead. Move these out of CONFIG
namespace and in to CFG namespace.

Signed-off-by: Tom Rini 
Reviewed-by: Simon Glass