u-boot.git/board/ge, branch v2018.01

board: ge: mx53ppd: Move check_time() to common location

2017-12-29T10:17:22Z

We are going to be using check_time() on more than the mx53ppd, move this function to a common location. Signed-off-by: Martyn Welch

mx53: Add Board support for GE PPD

2017-11-20T08:59:02Z

Create board support for GE PPD, based on mx53loco. Use mx53ppd_defconfig make target to configure for this board. Signed-off-by: Peter Senna Tschudin Signed-off-by: Ian Ray Signed-off-by: Nandor Han Signed-off-by: Martyn Welch Cc: Stefano Babic Acked-by: Stefano Babic

board: ge: make VPD code common

2017-11-20T08:58:31Z

The VPD data is used on a number of GE products. Move the parsing code to a common location so that we can share this code. Signed-off-by: Martyn Welch Acked-by: Stefano Babic

imx: Include header file

2017-10-12T15:31:16Z

When building with W=1 errors like the one below is seen: board/freescale/mx6sabresd/mx6sabresd.c:546:5: warning: no previous prototype for ‘overwrite_console’ [-Wmissing-prototypes] int overwrite_console(void) Fix the build warnings by including . Signed-off-by: Diego Dorta Reviewed-by: Fabio Estevam

board: ge: bx50v3: set eth0 MAC address

2017-09-20T13:34:59Z

Define i2c mux configuration. Add new vpd_reader which is used to read vital product data. Read VPD from EEPROM and set eth0 MAC address. Signed-off-by: Ian Ray Signed-off-by: Jose Alarcon

imx: reorganize IMX code as other SOCs

2017-07-12T08:17:44Z

Change is consistent with other SOCs and it is in preparation for adding SOMs. SOC's related files are moved from cpu/ to mach-imx/. This change is also coherent with the structure in kernel. Signed-off-by: Stefano Babic CC: Fabio Estevam CC: Akshay Bhat CC: Ken Lin CC: Marek Vasut CC: Heiko Schocher CC: "Sébastien Szymanski" CC: Christian Gmeiner CC: Stefan Roese CC: Patrick Bruenn CC: Troy Kisky CC: Nikita Kiryanov CC: Otavio Salvador CC: "Eric Bénard" CC: Jagan Teki CC: Ye Li CC: Peng Fan CC: Adrian Alonso CC: Alison Wang CC: Tim Harvey CC: Martin Donnelly CC: Marcin Niestroj CC: Lukasz Majewski CC: Adam Ford CC: "Albert ARIBAUD (3ADEV)" CC: Boris Brezillon CC: Soeren Moch CC: Richard Hu CC: Wig Cheng CC: Vanessa Maegima CC: Max Krummenacher CC: Stefan Agner CC: Markus Niebel CC: Breno Lima CC: Francesco Montefoschi CC: Jaehoon Chung CC: Scott Wood CC: Joe Hershberger CC: Anatolij Gustschin CC: Simon Glass CC: "Andrew F. Davis" CC: "Łukasz Majewski" CC: Patrice Chotard CC: Nobuhiro Iwamatsu CC: Hans de Goede CC: Masahiro Yamada CC: Stephen Warren CC: Andre Przywara CC: "Álvaro Fernández Rojas" CC: York Sun CC: Xiaoliang Yang CC: Chen-Yu Tsai CC: George McCollister CC: Sven Ebenfeld CC: Filip Brozovic CC: Petr Kulhavy CC: Eric Nelson CC: Bai Ping CC: Anson Huang CC: Sanchayan Maity CC: Lokesh Vutla CC: Patrick Delaunay CC: Gary Bisson CC: Alexander Graf CC: u-boot@lists.denx.de Reviewed-by: Fabio Estevam Reviewed-by: Christian Gmeiner

board: ge: bx50v3: apply the proper register setting to fix the voltage peak issue

2017-03-26T14:58:11Z

Apply the proper setting for the reserved bits in SetDes Test and System Mode Control register to avoid the voltage peak issue while we do the IEEE PHY comformance test Signed-off-by: Ken Lin Reviewed-by: Stefano Babic Acked-by: Ian Ray

board: ge: bx50v3: fix AR8033 reset timing issue

2017-03-26T14:58:08Z

Add the delay (10ms) to ensure the clock is stable and to meet the clock-to-reset(1ms) requirement recommended in the AR8033 datasheet Signed-off-by: Ken Lin Reviewed-by: Stefano Babic Acked-by: Ian Ray

board: ge: bx50v3: add the PMIC configuration support

2016-11-29T15:42:53Z

Change the PMIC bulk configuration from auto mode to sync mode to avoid voltage dropout issue seen in auto mode. Signed-off-by: Ken Lin Signed-off-by: Akshay Bhat

treewide: replace #include with

2016-09-23T21:55:42Z

Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap ) Replace all include directives for with . Signed-off-by: Masahiro Yamada [trini: Fixup include/clk.] Signed-off-by: Tom Rini