<feed xmlns='http://www.w3.org/2005/Atom'>
<title>u-boot.git/board/google, branch next</title>
<subtitle>Unnamed repository; edit this file 'description' to name the repository.
</subtitle>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/'/>
<entry>
<title>imx8mq: phanbell: enable SPL DM</title>
<updated>2026-04-21T23:49:40+00:00</updated>
<author>
<name>Peng Fan</name>
<email>peng.fan@nxp.com</email>
</author>
<published>2026-04-21T13:41:27+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=589153f6070a285a60411d032ce9b08598acd707'/>
<id>589153f6070a285a60411d032ce9b08598acd707</id>
<content type='text'>
Switch the Phanbell i.MX8MQ SPL to full Driver Model (DM) boot flow by
moving early device initialization into devicetree and enabling the
required SPL DM subsystems.

Mark GPIO, USDHC, pinctrl, and regulator nodes with bootph-pre-ram so
they are available during SPL. With DM handling MMC and power rails,
remove legacy board-specific USDHC, GPIO, and pad setup code from SPL.

Update the SPL initialization sequence to use spl_early_init(), clears
BSS earlier, and explicitly enables USDHC clocks before handing off to
board_init_r().

Signed-off-by: Peng Fan &lt;peng.fan@nxp.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Switch the Phanbell i.MX8MQ SPL to full Driver Model (DM) boot flow by
moving early device initialization into devicetree and enabling the
required SPL DM subsystems.

Mark GPIO, USDHC, pinctrl, and regulator nodes with bootph-pre-ram so
they are available during SPL. With DM handling MMC and power rails,
remove legacy board-specific USDHC, GPIO, and pad setup code from SPL.

Update the SPL initialization sequence to use spl_early_init(), clears
BSS earlier, and explicitly enables USDHC clocks before handing off to
board_init_r().

Signed-off-by: Peng Fan &lt;peng.fan@nxp.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>imx8mq: phanbell: drop redundant gd clearing in board_init_f</title>
<updated>2026-04-21T23:49:39+00:00</updated>
<author>
<name>Peng Fan</name>
<email>peng.fan@nxp.com</email>
</author>
<published>2026-04-21T13:41:15+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=27d49fc9ec7d6c92ef77cfdc32185499c264ee42'/>
<id>27d49fc9ec7d6c92ef77cfdc32185499c264ee42</id>
<content type='text'>
The global data (gd) area is already zeroed in
board_init_f_init_reserve() before board_init_f() is called.
Remove the duplicate gd clearing from board_init_f().

Signed-off-by: Peng Fan &lt;peng.fan@nxp.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The global data (gd) area is already zeroed in
board_init_f_init_reserve() before board_init_f() is called.
Remove the duplicate gd clearing from board_init_f().

Signed-off-by: Peng Fan &lt;peng.fan@nxp.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'u-boot-rockchip-20260309' of https://source.denx.de/u-boot/custodians/u-boot-rockchip into next</title>
<updated>2026-03-10T16:07:04+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2026-03-10T14:17:13+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=d93a63acfe701aa07c9223ec454164c88e7eb43d'/>
<id>d93a63acfe701aa07c9223ec454164c88e7eb43d</id>
<content type='text'>
CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/29452

- New SoC support: RK3506, RK3582;
- New Board support: RK3528 FriendlyElec NanoPi Zero2;
- Other fixes
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/29452

- New SoC support: RK3506, RK3582;
- New Board support: RK3528 FriendlyElec NanoPi Zero2;
- Other fixes
</pre>
</div>
</content>
</entry>
<entry>
<title>rockchip: Switch rk3288-veyron boards to upstream devicetree</title>
<updated>2026-03-10T16:07:02+00:00</updated>
<author>
<name>Johan Jonker</name>
<email>jbx6244@gmail.com</email>
</author>
<published>2026-01-16T22:12:45+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=03253abbae31dbe13d7b69f918e03be6b96d5c21'/>
<id>03253abbae31dbe13d7b69f918e03be6b96d5c21</id>
<content type='text'>
Switch rk3288-veyron boards to upstream devicetree.

Signed-off-by: Johan Jonker &lt;jbx6244@gmail.com&gt;
Reviewed-by: Kever Yang &lt;kever.yang@rock-chips.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Switch rk3288-veyron boards to upstream devicetree.

Signed-off-by: Johan Jonker &lt;jbx6244@gmail.com&gt;
Reviewed-by: Kever Yang &lt;kever.yang@rock-chips.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>treewide: Clean up DECLARE_GLOBAL_DATA_PTR usage</title>
<updated>2026-02-17T19:50:22+00:00</updated>
<author>
<name>Peng Fan</name>
<email>peng.fan@nxp.com</email>
</author>
<published>2026-02-09T01:30:18+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=0f90b1e715f8abe41b0875752eb184f46032ff11'/>
<id>0f90b1e715f8abe41b0875752eb184f46032ff11</id>
<content type='text'>
Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and
drop the unnecessary inclusion of asm/global_data.h.

Headers should be included directly by the files that need them,
rather than indirectly via global_data.h.

Reviewed-by: Patrice Chotard &lt;patrice.chotard@foss.st.com&gt; #STMicroelectronics boards and STM32MP1 ram test driver
Tested-by: Anshul Dalal &lt;anshuld@ti.com&gt; #TI boards
Acked-by: Yao Zi &lt;me@ziyao.cc&gt; #TH1520
Signed-off-by: Peng Fan &lt;peng.fan@nxp.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and
drop the unnecessary inclusion of asm/global_data.h.

Headers should be included directly by the files that need them,
rather than indirectly via global_data.h.

Reviewed-by: Patrice Chotard &lt;patrice.chotard@foss.st.com&gt; #STMicroelectronics boards and STM32MP1 ram test driver
Tested-by: Anshul Dalal &lt;anshuld@ti.com&gt; #TI boards
Acked-by: Yao Zi &lt;me@ziyao.cc&gt; #TH1520
Signed-off-by: Peng Fan &lt;peng.fan@nxp.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>x86: Move Intel GNVS file into the common include directory</title>
<updated>2025-06-13T19:10:33+00:00</updated>
<author>
<name>Simon Glass</name>
<email>sjg@chromium.org</email>
</author>
<published>2025-05-28T12:32:07+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=a6e4fdfd77be4bd159cc73214bbf0a96df3aa551'/>
<id>a6e4fdfd77be4bd159cc73214bbf0a96df3aa551</id>
<content type='text'>
Move this so we can include it from sandbox, needed since it is in a
bloblist and must have a check.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Move this so we can include it from sandbox, needed since it is in a
bloblist and must have a check.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>google: Include env.h to permit reading the environment</title>
<updated>2025-05-29T14:30:25+00:00</updated>
<author>
<name>Simon Glass</name>
<email>sjg@chromium.org</email>
</author>
<published>2025-05-15T23:31:44+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=98faae1617b44e53c475adf8552245691e1f05fb'/>
<id>98faae1617b44e53c475adf8552245691e1f05fb</id>
<content type='text'>
This file reads from the environment but does not include the correct
header. Update it.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This file reads from the environment but does not include the correct
header. Update it.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dm: sysinfo: Shorten the SYSINFO_ID prefix</title>
<updated>2024-11-17T19:12:54+00:00</updated>
<author>
<name>Simon Glass</name>
<email>sjg@chromium.org</email>
</author>
<published>2024-10-31T17:50:23+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=3fcbae5f849b2a5c36ad5ca0d90dd94191760053'/>
<id>3fcbae5f849b2a5c36ad5ca0d90dd94191760053</id>
<content type='text'>
We are about to add a large number of new entries. Update the prefix to
be a little shorter.

For SMBIOS items, use SYSID_SM_ (for System Management) which is enough
to distinguish it. For now at least, it seems that most items will be
for SMBIOS.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
Acked-by: Raymond Mao &lt;raymond.mao@linaro.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
We are about to add a large number of new entries. Update the prefix to
be a little shorter.

For SMBIOS items, use SYSID_SM_ (for System Management) which is enough
to distinguish it. For now at least, it seems that most items will be
for SMBIOS.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
Acked-by: Raymond Mao &lt;raymond.mao@linaro.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge patch series "Tidy up use of 'SPL' and CONFIG_SPL_BUILD"</title>
<updated>2024-10-11T18:23:25+00:00</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2024-10-11T18:23:25+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=47e544f576699ca4630e20448db6a05178960697'/>
<id>47e544f576699ca4630e20448db6a05178960697</id>
<content type='text'>
Simon Glass &lt;sjg@chromium.org&gt; says:

When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL

Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.

For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:

   #if defined(CONFIG_SPL_BUILD) &amp;&amp; !defined(CONFIG_TPL_BUILD)

In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.

This series starts a change in terminology and usage to resolve the
above issues:

- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
  'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
  defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_

It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.

This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.

The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Simon Glass &lt;sjg@chromium.org&gt; says:

When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL

Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.

For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:

   #if defined(CONFIG_SPL_BUILD) &amp;&amp; !defined(CONFIG_TPL_BUILD)

In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.

This series starts a change in terminology and usage to resolve the
above issues:

- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
  'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
  defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_

It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.

This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.

The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.
</pre>
</div>
</content>
</entry>
<entry>
<title>board: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILD</title>
<updated>2024-10-11T17:44:48+00:00</updated>
<author>
<name>Simon Glass</name>
<email>sjg@chromium.org</email>
</author>
<published>2024-09-30T01:49:47+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=dac3ce976a9b06be5aadbd857c4b64a8c521c6d4'/>
<id>dac3ce976a9b06be5aadbd857c4b64a8c521c6d4</id>
<content type='text'>
Use the new symbol to refer to any 'SPL' build, including TPL and VPL

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Use the new symbol to refer to any 'SPL' build, including TPL and VPL

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
