u-boot.git/board/google, branch v2023.01

global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace

2022-11-10T15:08:55Z

Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini Reviewed-by: Simon Glass

Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE

2022-10-31T15:01:31Z

The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass

chameleonv3: Add MAINTAINERS file

2022-07-01T19:55:54Z

This file was missing, add. Signed-off-by: Tom Rini

board: Add Chameleonv3 board dir

2022-07-01T06:57:14Z

Add board directory for Google Chameleon V3 board Signed-off-by: Paweł Anikiel Reviewed-by: Simon Glass

board: google: veyron: add more DT files to MAINTAINERS

2022-04-18T03:25:13Z

The Google Veyron rk3288 DT files are synced from Linux. Add a maintainer to look after them and to help with review and testing. Signed-off-by: Johan Jonker Reviewed-by: Kever Yang

Merge tag 'v2022.04-rc5' into next

2022-03-28T16:36:49Z

Prepare v2022.04-rc5

rockchip: rk3399: Add support for chromebook_kevin

2022-03-18T10:12:03Z

Add support for Kevin, an RK3399-based convertible chromebook that is very similar to Bob. This patch is mostly based on existing support for Bob, with only minor changes for Kevin-specific things. Unlike other Gru boards, coreboot sets Kevin's center logic to 925 mV, so adjust it here in the dts as well. The rk3399-gru-kevin devicetree has an unknown event code reference which has to be defined, set it to the Linux counterpart. The new defconfig is copied from Bob with the diffconfig: DEFAULT_DEVICE_TREE "rk3399-gru-bob" -> "rk3399-gru-kevin" DEFAULT_FDT_FILE "rockchip/rk3399-gru-bob.dtb" -> "rockchip/rk3399-gru-kevin.dtb" VIDEO_ROCKCHIP_MAX_XRES 1280 -> 2400 VIDEO_ROCKCHIP_MAX_YRES 800 -> 1600 +TARGET_CHROMEBOOK_KEVIN y With this Kevin can boot from SPI flash to a usable U-Boot prompt on the display with the keyboard working, but cannot boot into Linux for unknown reasons. eMMC starts in a working state but fails to re-init, microSD card works but at a lower-than-expected speed, USB works but causes a hang on de-init. There are known workarounds to solve eMMC and USB issues. Cc: Marty E. Plummer Cc: Simon Glass [Alper: commit message, resync config with Bob, update MAINTAINERS, add to Rockchip doc, add Kconfig help message, set regulator] Co-developed-by: Alper Nebi Yasak Signed-off-by: Alper Nebi Yasak Reviewed-by: Kever Yang Reviewed-by: Simon Glass Tested-by: Simon Glass

rockchip: gru: Set up SoC IO domain registers

2022-03-18T10:12:03Z

The RK3399 SoC needs to know the voltage value provided by some regulators, which is done by setting relevant register bits. Configure these the way other RK3399 boards do, but with the same values as are set in the equivalent code in coreboot. Signed-off-by: Alper Nebi Yasak Reviewed-by: Kever Yang Reviewed-by: Simon Glass Tested-by: Simon Glass

event: Convert misc_init_f() to use events

2022-03-10T13:28:36Z

This hook can be implmented using events, for the three boards that actually use it. Add the event type and event handlers. Drop CONFIG_MISC_INIT_F since we can just use CONFIG_EVENT to control this. Since sandbox always enables CONFIG_EVENT, we can drop the defconfig lines there too. Signed-off-by: Simon Glass

Convert CONFIG_BIOSEMU to Kconfig

2022-03-03T21:51:19Z

This converts the following to Kconfig: CONFIG_BIOSEMU Cc: Simon Glass Signed-off-by: Tom Rini