u-boot.git/board/isee, branch v2016.11Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/board/isee?h=v2016.112016-11-13T20:54:34Zigep00x0: add Hynix timings2016-11-13T20:54:34ZLadislav Michlladis@linux-mips.org2016-11-04T11:59:46Zurn:sha1:4fa72bd3fc7755777be0850a99b91d2efad6740b
Tested on IGEPv2 with Micron MT29F4G16ABBDA3W and
Hynix H27S4G6F2DKA-BM
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Javier Martinez Canillas <javier@samsung.com>
Tested-by: Javier Martinez Canillas <javier@samsung.com>
igep00x0: disable CONFIG_DISPLAY_BOARDINFO2016-11-13T20:54:34ZLadislav Michlladis@linux-mips.org2016-11-04T11:55:21Zurn:sha1:ad560f87e0eb5c82a4f6393b6f873fa737556a59
As a single U-Boot binary can now run on various board modifications,
drop CONFIG_DISPLAY_BOARDINFO as it prints flash memory information
too early to give us chance to easily detect it. Also saves few bytes
as a bonus.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Javier Martinez Canillas <javier@samsung.com>
Tested-by: Javier Martinez Canillas <javier@samsung.com>
igep00x0: Falcon mode2016-07-22T18:46:19ZLadislav Michlladis@linux-mips.org2016-07-12T18:28:34Zurn:sha1:fe9f6289e1a50d691ad591fa4224b8a3aa250848
Implement spl_start_uboot to let Falcon mode work.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
igep00x0: generate default mtdparts according NAND chip used2016-07-22T18:46:19ZLadislav Michlladis@linux-mips.org2016-07-12T18:28:33Zurn:sha1:a5debaa3920ca1f50896a2cfc25597f4aaca7bf6
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
igep00x0: runtime flash detection2016-07-22T18:46:18ZLadislav Michlladis@linux-mips.org2016-07-12T18:28:31Zurn:sha1:97ee70606cae6cc7cc300b20ffb5da3c4b547374
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
igep00x0: remove unused empty function omap_rev_string()2016-07-22T18:46:17ZLadislav Michlladis@linux-mips.org2016-07-12T18:28:30Zurn:sha1:c2d47fa6661c8e51acfd0619603194585fcb5689
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
igep00x0: remove useless setup_net_chip declaration2016-07-22T18:46:17ZLadislav Michlladis@linux-mips.org2016-07-12T18:28:29Zurn:sha1:cccdb1965b80c1068fff7d2978f668caa76119df
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
igep00x0: reorder lan9221 code to remove ifdefs2016-07-22T18:46:16ZLadislav Michlladis@linux-mips.org2016-07-12T18:28:28Zurn:sha1:b0c47633cc550f2ded597aa80240a2d09619f827
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
igep00x0: move sysinfo into C file2016-07-22T18:46:15ZLadislav Michlladis@linux-mips.org2016-07-12T18:28:27Zurn:sha1:b7e042d6af8263d03a8770cda999eed308192def
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
ARM: Various: Future-proof serial platdata2016-03-14T23:18:48ZAdam Fordaford173@gmail.com2016-03-08T03:08:49Zurn:sha1:2f6ed3b89a1760ffa73123fb266de3d56eb5d88e
A few boards still use ns16550_platdata structures, but assume the structure
is going to be in a specific order. By explicitly naming each entry,
this should also help 'future-proof' in the event the structure changes.
Tested on the Logic PD Torpedo + Wireless.
I only changed a handful of devices that used the same syntax as the Logic
board. Appologies if I missed one or stepped on toes. Thanks to Derald Woods
and Alexander Graf.
Signed-off-by: Adam Ford <aford173@gmail.com>
V6: Add fix to arch/arm/cpu/armv7/am33xx/board.c
V5: Add fix to arch/arm/cpu/arm926ejs/lpc32xx/devices.c
V4: Fix subject heading
V3: Remove reg_offset out in all the structs. It was reverted out, and and if
it did exist, it would get initialized to 0 by default.
V2: I hastily copy-pasted the boards without looking at the UART number.
This addresses 3 boards that use UART3 and not UART1.
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>