u-boot.git/board/jse, branch v1.3.2

Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections

2008-01-12T19:31:39Z

With recent toolchain versions, some boards would not build because or errors like this one (here for ocotea board when building with ELDK 4.2 beta): ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab] For many boards, the .bss section is big enough that it wraps around at the end of the address space (0xFFFFFFFF), so the problem will not be visible unless you use a 64 bit tool chain for development. On some boards however, changes to the code size (due to different optimizations) we bail out with section overlaps like above. The fix is to add the NOLOAD attribute to the .bss and .sbss sections, telling the linker that .bss does not consume any space in the image. Signed-off-by: Wolfgang Denk

Move "ar" flags to config.mk to allow for silent "make -s"

2006-10-08T23:02:05Z

Based on patch by Mike Frysinger, 20 Jun 2006

Coding style cleanup

2006-10-08T22:42:01Z

Add support for a saving build objects in a separate directory.

2006-09-01T17:49:50Z

Modifications are based on the linux kernel approach and support two use cases: 1) Add O= to the make command line 'make O=/tmp/build all' 2) Set environement variable BUILD_DIR to point to the desired location 'export BUILD_DIR=/tmp/build' 'make' The second approach can also be used with a MAKEALL script 'export BUILD_DIR=/tmp/build' './MAKEALL' Command line 'O=' setting overrides BUILD_DIR environent variable. When none of the above methods is used the local build is performed and the object files are placed in the source directory.

2005-12-12T15:06:05Z

Fix problems with ld version 2.16 (dot outside sections problem)

2005-08-31T10:28:00Z

Pointed out by Gerhard Jaeger, 31 Aug 2005; cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html

* Code cleanup, mostly for GCC-3.3.x

2004-12-31T09:32:47Z

* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for additional ethernet addresses. * Cleanup drivers/i82365.c - avoid duplication of code * Fix bogus "cannot span across banks" flash error message * Add support for CompactFlash for the CPC45 Board.

* Patch by Stephen Williams, 15 July 2004

2004-09-28T19:00:19Z

Set the PCI class code for JSE board as part of PCI interface setup * Patch by Michael Bendzick, 15 Jul 2004: Fix problem with writes with odd sizes in drivers/cfi_flash.c when CFG_FLASH_USE_BUFFER_WRITE is set

Patch by Stephen Williams, 11 May 2004:

2004-06-09T00:15:33Z

Add flash support for ST M29W040B Reduce JSE specific flash.c to remove dead code.

Make compile clean.

2004-04-25T16:40:11Z