This patch renames the board directory from board/freescale to
board/nxp because NXP now provides Board Support Packages (BSPs) and
tools for the former Freescale i.MX and other i.MX products.

All relevant references have been updated accordingly. This change does
not affect functionality.

Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

use the new email address for community work.

While at it, cleanup git shortlog output, by adding
fixes in .mailmap

Signed-off-by: Heiko Schocher <hs@nabladev.com>

The mainainers for these boards have changed.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Signed-off-by: Tomas Alvarez Vanoli <tomas.alvarez-vanoli@hitachienergy.com>

Move the call to configure the qrio i2c deblock pins earlier.
Before this, the call was happening after the first attempt to deblock
the SDP EEPROM, which resulted in a not correct sequence.

Signed-off-by: Tomas Alvarez Vanoli <tomas.alvarez-vanoli@hitachienergy.com>
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>

Upcoming boards will have different ethernet interfaces. So we move this
variable out of the common code.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>

This variable is unused since we dropped the support for the Kirkwood
boards.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>

Setting GPIO by reading the value of the GPRT register, toggling the
correct bit and then writing it causes input values to transfer to the
output. Here's how (example):

1) set gpio 17 and 18 as input.
2) set gpio 17 output value to 0 (read gprt, change 17 to 0, write).
3) set gpio 18 output value to 0 (read gprt, change 18 to 0, write).

The problem here is that because we set 17 as input, and it's a pull-up,
when we read gprt in step 3, the bit 17 will be 1 and not 0.
Instead of doing read/write/modify, the solution is to keep track
internally of the user set GPIOs, and replace the read step with this
static variable.

Signed-off-by: Tomas Alvarez Vanoli <tomas.alvarez-vanoli@hitachienergy.com>
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>

Now that env_get_ip() has been removed, the include file <net.h> does
not need anything from <env.h>. Furthermore, include/env.h itself
includes other headers which can lead to longer indirect inclusion
paths. To prepare to remove <env.h> from <net.h> fix all of the
remaining places which had relied on this indirect inclusion to instead
include <env.h> directly.

Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org> # net/lwip
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

Add CONFIG_BOOTCOUNT_ALTBOOTCMD so the developer is able to add
custom altbootcmd via Kconfig when they enable BOOTCOUNT. With this now
in Kconfig, we need to move it from environment files / config.h files
and in to the defconfig file.

This was done by generating u-boot-initial-env for all platforms before
the Kconfig change, to extract altbootcmd values and then again after to
compare the result.

[trini: Perform migration to defconfigs, reword commit message]
Signed-off-by: Tom Rini <trini@konsulko.com>

The conversion to DM_I2C is mandatory, rework to remove
use of legacy I2C API.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
Cc: Holger Brunck <holger.brunck@hitachienergy.com>
Cc: Tomas Alvarez Vanoli <tomas.alvarez-vanoli@hitachienergy.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>