u-boot.git/board/keymile, branch v2009.03

8xx: add support for new keymile kmsupx4 board.

2009-03-18T19:50:05Z

This patch adds support for the kmsupx4 board from Keymile, based on a Freescale MPC852T CPU - serial console on SMC1 - 32 MB SDRAM - 32 MB NOR Flash - Ethernet over SCC3 - I2C Bitbang Signed-off-by: Heiko Schocher

8xx, mgsuvd: rename board to a more generic name

2009-03-18T19:50:04Z

renaming the "mgsuvd" board port into "km8xx", because there come more similar boards from keymile. Compiling the mgsuvd board with "make mgsuvd_config" remains. Signed-off-by: Heiko Schocher

83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1

2009-03-06T00:21:29Z

old code implemented the QE_ENET10 errata only for Silicon Revision 2.0. New code reads now the Silicon Revision register and sets dependend on the Silicon Revision the values as advised in the QE_ENET10 errata. Signed-off-by: Heiko Schocher Signed-off-by: Kim Phillips

83xx, kmeter1: autodetect size of DDR II RAM

2009-03-06T00:21:17Z

it is possible that some board variants have different DDR II RAM sizes. So we autodetect the size of the assembled RAM. Signed-off-by: Heiko Schocher Signed-off-by: Kim Phillips

83xx, kmeter1: add I2C, dtt, eeprom support

2009-03-06T00:21:17Z

This patch adds I2C support for the Keymile kmeter1 board. It uses the First I2C Controller from the CPU, for accessing 4 temperature sensors, an eeprom with IVM data and the booteeprom over a pca9547 mux. Signed-off-by: Heiko Schocher Signed-off-by: Kim Phillips

82xx, mgcoge: updates for 2009.03

2009-02-19T20:20:16Z

- activate CS4 for accessing the FPGA - activate Rx buf len > 1 on SMC - pram activated - MTDPARTS_DEFAULT defined - update the size of the flashes in the DTS before booting Linux - MONITOR_LEN updated to 384k - added CONFIG_HOSTNAME - added CONFIG_ENV_BUFFER_PRINT - Environment size reduced to 16k Signed-off-by: Heiko Schocher

8xx, mgsuvd: updates for 2009.03

2009-02-19T20:19:45Z

- activate Rx buf len > 1 on SMC - pram activated - MTDPARTS_DEFAULT defined - update the size of the flash in the DTS before booting Linux - MONITOR_LEN updated to 384k - added CONFIG_HOSTNAME - added CONFIG_ENV_BUFFER_PRINT - Environment size reduced to 16k Signed-off-by: Heiko Schocher

Command usage cleanup

2009-01-28T07:49:52Z

Remove command name from all command "usage" fields and update common/command.c to display "name - usage" instead of just "usage". Also remove newlines from command usage fields. Signed-off-by: Peter Tyser

powerpc: keymile: Add a check for the PIGGY debug board

2009-01-23T23:39:06Z

Check the presence of the PIGGY on the keymile boards mgcoge, mgsuvd and kmeter1. If the PIGGY is not present, dont register this Ethernet device. Signed-off-by: Heiko Schocher Acked-by: Ben Warren

powerpc: 83xx: add support for the kmeter1 board

2009-01-23T23:36:19Z

This patch adds support for the kmeter1 board from Keymile, based on a Freescale MPC8360 CPU. - serial console on UART 1 - 256 MB DDR2 RAM - 64 MB NOR Flash - Ethernet RMII Mode over UCC4 - PHY SMSC LAN8700 Signed-off-by: Heiko Schocher